Professional China Xcmg Grader Parts – Wheel Rim for Motor Grader spare parts – CCMIC

Wheel Rim

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.

Advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

Packing  

Carton Boxes, or according to clients’ request.

description

In the operation of the motor grader, matters needing attention are the part of the rim assembly design
1. The operator of the grader should have experience and skills in the operation of a bulldozer or loader.
2. When using the motor grader, pay attention to whether there is any abnormal noise in each part of the engine and the chassis, and whether there is an odor caused by the burning of friction parts.
3. According to seasonal changes and environmental temperature changes, appropriate hydraulic oil, lubricating oil (grease) and fuel should be selected in accordance with the instruction manual. The oil used shall not be substituted without the formal approval of the management department.
4. The refueling material should be strictly filtered to ensure that the refueling container, refueling port and the refueling process are not contaminated.
5. Regulations on the use of hydraulic devices.
6. When checking the circuit, if you encounter oily and easily catching parts, use a test lamp or an electric meter to check. No 7. The insulation of the wire must be good, the joints must be tight and firm, wrapped with tape or covered with plastic pipes to prevent ground leakage
8. Regulations on the use of batteries
9. Do not perform welding or gas cutting near the pressure oil pipe of the motor grader or other flammable materials. When welding is needed, you must first turn off the engine, cut off the main switch of the battery, or disconnect the ground wire of the battery from the pile head, so as to avoid the adverse consequences of a short circuit of the power supply during work. The ground wire of the electric welder should be connected to the workpiece to be welded, and as close as possible to the welding part.
10. Inflate the tire at the pressure specified by the tire manufacturer. When inflating, a long rubber tube with a self-locking chuck should be used, and the person should stand on the back side of the tire.
11. Before removing the object embedded in the tire or disassembling the tire rim assembly, deflate the tire. 12. It is strictly forbidden to mix rim parts from different manufacturers, and it is forbidden to use damaged or worn rims. The rim must be installed correctly.
13. To prevent the tire from exploding due to intense heat. When this phenomenon occurs, you must observe from a safe distance and wait for the tires to cool down before approaching the motor grader. If the tire suddenly bursts and leaks during driving, after stopping, the driver can leave after the tire has cooled down.
14. Maintenance and replacement of tires and rims should be carried out by specialized personnel with special tools and equipment. 15. When encountering construction blasting operations, the motor grader must be immediately withdrawn from the dangerous area and parked in a level area with no safety hazards to ensure reliable braking. Do not drive the motor grader into the dangerous area when the alarm is not cleared.
16. When passing a bridge, pay attention to the carrying capacity of the bridge sign. For bridges without signs, you should contact the relevant departments to confirm that they can bear the weight of the aircraft before they can pass. When crossing the bridge, use the first speed.

our warehouse

Pack and ship

• Aerial Boom Lift
• China Dump Truck
• Cold Recycler
• Cone Crusher Liner
• Container Side Lifter
• Dadi Bulldozer Part
• Forklift Sweeper Attachment
• Hbxg Bulldozer Parts
• Howo Engine Parts
• Hyundai Excavator Hydraulic Pump
• Komatsu Bulldozer Parts
• Komatsu Excavator Gear Shaft
• Komatsu Pc300-7 Excavator Hydraulic Pump
• Liugong Bulldozer Parts
• Sany Concrete Pump Spare Parts
• Sany Excavator Spare Parts
• Shacman Engine Parts
• Shantui Bulldozer Clutch Shaft
• Shantui Bulldozer Connecting Shaft Pin
• Shantui Bulldozer Control Flexible Shaft
• Shantui Bulldozer Flexible Shaft
• Shantui Bulldozer Lifting Cylinder Repair Kit
• Shantui Bulldozer Parts
• Shantui Bulldozer Reel Shaft
• Shantui Bulldozer Reverse Gear Shaft
• Shantui Bulldozer Spare Parts
• Shantui Bulldozer Winch Drive Shaft
• Shantui Dozer Bolt
• Shantui Dozer Front Idler
• Shantui Dozer Tilt Cylinder Repair Kit
• Shantui Sd16 Bevel Gear
• Shantui Sd16 Brake Lining
• Shantui Sd16 Door Assembly
• Shantui Sd16 O-Ring
• Shantui Sd16 Track Roller
• Shantui Sd22 Bearing Sleeve
• Shantui Sd22 Friction Disc
• Shantui Sd32 Track Roller
• Sinotruk Engine Parts
• Tow Truck
• Xcmg Bulldozer Parts
• Xcmg Bulldozer Spare Parts
• Xcmg Hydraulic Lock
• Xcmg Transmission
• Yuchai Engine Parts