shaft seal for XCMG RP705 paver spare parts

Short Description:

Dust seal 80×90×6/8, Part No.860507239, is installed on the outer side of cylinder guide sleeve. It is an external protective seal for piston rod, blocking dirt, sand, dust and rainwater from entering the cylinder, protecting inner main seals and chrome surface of piston rod.

Product Detail

Product Tags

description

This shaft seal is generally made of NBR nitrile rubber with garter spring, which keeps the sealing lip tightly against the shaft surface. A thin oil film forms during rotation to reduce lip wear. Single-lip and double-lip types are available; double-lip version has an extra dust lip for better protection. It is applied on travel motor, reduction gearbox, sprocket shaft and hydraulic pump shaft for rotary sealing. Different from reciprocating cylinder seals, it is a common wearing part for chassis drive and hydraulic rotary overhaul.

product parameters

Product Name:Shaft Seal
Material:NBR nitrile rubber (FKM for high temperature option)
Structure:Metal frame + rubber lip + garter spring
Motion Type:Rotary seal
Working Medium:Gear oil, lubricating grease
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Used for rotary positions of paver travel motor, reducer, drive sprocket shaft and hydraulic pump shaft. It seals gear oil and lubricant, prevents oil leakage and mud contamination of bearings and gears.

advantage

▪ Built-in spring compensates lip wear continuously for stable sealing
▪ Double-lip design with integrated dust lip for dual protection
▪ NBR material is oil-resistant, wear-resistant and cost-effective
▪ Reinforced metal frame, keeps shape after press fitting
▪ Direct fit for paver travel and drive rotary assemblies, easy replacement

FAQ

Q:Is shaft seal the same as cylinder dust seal?
A:No. Shaft seal is for rotary shaft; dust seal is for reciprocating piston rod. Not interchangeable.

Q:How to confirm installation direction?
A:Main lip faces oil chamber, dust lip faces outside. Reverse installation causes leakage and contamination.

Q:Is slight oil seepage normal?
A:Light seepage for lubrication film is normal. Continuous dripping means seal failure.

Q:Can I install new shaft seal on scratched shaft?
A:Scratches will cut the new lip quickly. Repair or replace the shaft first.

Q:Only replace the shaft seal when leaking?
A:Check breather hole and bearing clearance. Abnormal pressure will damage new seal repeatedly.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us