229000087 plate of scraping mud XCMG XS335IV road roller spare parts

Short Description:

229000087 Plate of Scraping Mud is installed on outer side of drum for XCMG XS335IV road roller, closely attached to drum surface. It scrapes off mud, sand and mixture adhered on drum during operation, preventing bump and indentation defects on compacted road surface caused by mud accumulation. Timely replacement is required when scraper plate becomes thin due to wear, cracked, deformed or has excessive gap against drum with poor scraping performance, to guarantee paving construction quality.

Send email to us

Product Detail

Product Tags

description

Part number: 229000087
Part name: plate of scraping mud
Unit name: engine hood assembly
Applicable Models: XCMG XS335IV vibratory roller

Compatible with XCMG Road Roller XS335IV. Suitable for working conditions such as large‑scale subgrade backfill, soft‑soil subgrade compaction, earthwork site and muddy site compaction after rain. Applied for heavy mud adhesion on drum, worn & broken scraper plate, poor scraping effect even after gap adjustment and drum‑mechanism inspection & maintenance. Fit for original spare‑part replacement, overseas project maintenance in Middle East and Southeast Asia, drum auxiliary‑mechanism service for XS335IV road roller.

1	PLATE OF SCRAPING MUD	229000084
2	WASHER 16	805301377
3	BOLT	805046573

=======================================

advantages

High‑wear‑resistant plate material with good impact‑resistance, withstand repeated gravel friction for long service life
Curvature matches drum outer diameter for good fitting performance, realize thorough scraping and reduce material adhesion on drum
OEM‑standard mounting holes allow fine‑tuning of clearance, direct on‑site installation without cutting modification
Good bending‑resistance, not easy to break under extrusion of large hard debris, suitable for complicated earthwork site.

FAQ

Q: Can scraper plate with edge wear be reused after grinding?
A: Grinding will change curvature once effective scraping surface is consumed and lead to poor scraping performance, new replacement is recommended.
Q: What should be checked firstly for abnormal noise after new scraper installation?
A: Inspect too‑small clearance, plate deformation and welding bump on drum surface first, readjust after troubleshooting.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.