252100843 bracket for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Part No：252100843
Product Type：Equipment Mounting Bracket
Applicable Equipment：XCMG ZL50G / ZL50GL 5 Ton Wheel Loader
Core Technology：Steel plate bending forming, CNC hole machining, reinforcing plate welding reinforcement
Material：High strength carbon steel Q235
Surface Treatment：Sand blasting + matte black anti-rust spray painting
Overall Length：215mm，the maximum outer contour length of the whole bracket finished piece
Overall Width：128mm，the maximum outer contour width measured from left to right of bracket main body
Overall Height：142mm，vertical dimension from the bottom mounting surface to the top installation plane
Mounting Hole Diameter：13mm，standard bolt hole size, match M12 fixing bolt
Hole Spacing：160mm，center distance between two main fixing mounting holes
Working Load Limit：≤1200kg，maximum static bearing load under normal installation state
Working Temperature Range：-40℃ ~ +120℃，adapt to low-temperature winter startup and high-temperature continuous operation environment
Weight：4.15kg，total weight of the whole bracket including reinforcing plate and welding assembly
Application：Fixed support bracket for loader accessories installation

• High-quality Q235 carbon steel material, excellent tensile and impact resistance, not easy to bend or deform under repeated vibration and impact load.
• Integral bending forming structure, internal stress fully released, avoid gradual deformation or distortion after long-term heavy-duty use.
• Reinforcing plate welding strengthening design, greatly improve the local strength of stress concentration area, effectively prevent bracket fracture.
• CNC precision drilling mounting holes, hole position accuracy high, bolt assembly smooth, uniform stress after tightening.
• Sand blasting and spray painting anti-corrosion treatment, strong rust resistance, adapt to muddy, dusty construction site working environment.
• OEM standard overall dimension and hole layout, completely match original vehicle installation position, easy to install and replace.
• Simple and reasonable structure, no redundant structure, reduce the weight of the whole machine while ensuring enough bearing capacity.

FAQ 

Q1：What signs indicate the bracket needs replacement?
A1：Bracket obvious bending deformation, crack on welding seam, serious corrosion and rust perforation, mounting hole worn out, fixed accessories shaking violently.

Q2：What should be noted during bracket installation?
A2：Clean the vehicle mounting base and remove rust and dirt. Keep the bracket fitting surface flat, tighten bolts evenly in diagonal order to prevent local stress concentration.

Q3：What are the common causes of bracket damage?
A3：Long-term alternating vibration fatigue; overload impact; installation bolt uneven tightening; serious corrosion rust eating through steel plate.

Q4：Can bent bracket be corrected and reused?
A4：Not recommended. Once steel plate produces plastic bending deformation, internal metal grain structure is damaged. It may crack suddenly under load again, better to replace with new bracket.

Q5：How to inspect bracket in daily maintenance?
A5：Check bracket surface and welding seam for cracks during regular inspection, check whether mounting bolts are loose, observe shaking condition of the installed accessory.

Q6：What trouble will failed bracket bring?
A6：Mounted accessories lose fixed support, accessories shake violently during operation, bolt looseness and fall off. In severe cases, parts fall off and cause collision damage to other nearby components.