Leftguardnet for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Part No：Leftguardnet
Product Type：Left Fan Guard Net Assembly
Applicable Equipment：XCMG ZL50G / ZL50GL 5 Ton Wheel Loader
Core Technology：Steel bar welded mesh, stamping frame forming, electrostatic spray coating anti-corrosion
Material：Low carbon steel round bar + Q235 thick steel plate frame
Surface Treatment：Sand blasting + matte black electrostatic plastic spraying
Overall Length：560mm，the maximum outer contour length of the whole guard net finished piece
Overall Width：410mm，the maximum outer contour width measured from left to right of guard net frame
Mesh Aperture：45mm，square mesh size, balance of protection and air ventilation
Mounting Hole Diameter：13mm，standard bolt hole size, match M12 fixing bolt
Hole Spacing：425mm，center distance between two main fixing mounting holes
Working Temperature Range：-40℃ ~ +120℃，adapt to low-temperature winter startup and high-temperature continuous operation environment
Weight：3.65kg，total assembly weight including mesh, frame and mounting lugs
Application：Cooling fan protective guard for radiator left side

• High-strength welded steel mesh structure, strong impact resistance, not easy to deform when hit by flying stones on site.
• Thickened stamped steel frame, good rigidity, strong anti-vibration performance, long-term operation without shaking and loosening.
• Reasonable mesh layout, ensure large air flow passing through, will not reduce radiator heat dissipation efficiency.
• Electrostatic plastic spraying anti-corrosion surface treatment, good rust resistance, adapt to muddy, dusty construction site environment.
• OEM standard overall dimension and hole layout, completely match original vehicle installation position, easy to install and replace.
• Integrated mounting lug design, uniform force after bolt locking, avoid local stress deformation of guard net.
• Lightweight structure design, while ensuring impact resistance, will not bring extra load to the cooling module.

FAQ 

Q1：What signs indicate the fan guard net needs replacement?
A1：Serious mesh deformation, broken welding seam, large area rust perforation, mesh fracture, mounting lug broken.

Q2：What should be noted during fan guard net installation?
A2：Clean the radiator surface and fan area before installation. Align mounting holes, tighten bolts evenly in diagonal order to prevent local stress concentration.

Q3：What are the common causes of guard net damage?
A3：Flying stone impact; long-term vibration fatigue; serious corrosion rust eating through steel mesh; improper installation leading to stress crack.

Q4：Can bent guard net be corrected and reused?
A4：Not recommended. Once the steel mesh produces plastic bending deformation, the welding joint is easy to crack again under impact, better to replace with new guard net.

Q5：How to inspect guard net in daily maintenance?
A5：Check mesh and welding seam for cracks during regular inspection, check whether mounting bolts are loose, clean debris stuck in mesh gap.

Q6：What trouble will failed guard net bring?
A6：Large stones and branches directly hit rotating fan blade, fan blade breakage, debris block radiator core, cause engine overheating.

Q7：Can this left fan guard net be used for other loader models?
A7：This left fan guard net is specially customized for ZL50G/ZL50GL. Overall size, mesh size and hole spacing are exclusive specifications. Without modification, it cannot be installed directly on other models.