252100927 hose assembly for XCMG ZL50G/ZL50GL Wheel Loader

252100927 hose assembly for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 252100927 hose assembly for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Hose Assembly, Part No.252100927, fits XCMG ZL50G, ZL50GL wheel loader. It is a transmission pipeline component for hydraulic system.

Product Detail

Product Tags

description

This 252100927 hose assembly is matched for hydraulic system of XCMG ZL50G and ZL50GL wheel loader. It adopts steel wire reinforced composite rubber structure, with oil-resistant inner rubber, multi-layer steel wire reinforcement and wear-resistant outer cover, and high-strength steel crimped fittings on both ends. During operation, the boom and bucket mechanism vibrate continuously, and this flexible hose compensates displacement and transfers high-pressure hydraulic oil for stable hydraulic pressure. Hose length, fitting specification and bending radius follow OEM drawings to fit the frame layout. It can directly replace leaking and damaged hoses and is compatible with original valves, cylinders and clamps without pipeline modification. Every hose passes pressure, pulse fatigue and oil resistance test. It resists abrasion and temperature change under muddy site conditions, preventing power loss and safety hazards caused by hydraulic oil leakage.

product parameters

Product Name: Hose Assembly
Part No.: 252100927
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Function: High-pressure hydraulic oil transmission and flexible shock-absorbing connection for hydraulic circuit
Hose Material: Oil-resistant rubber + steel wire reinforcement
Fitting Material: Galvanized carbon steel
Structure: Crimped integrated connectors on both ends
Installation: Matches original hydraulic steel pipes, pipe clamps, brackets and sealing washers
Working Condition: Quarry mining, aggregate yard, heavy earthwork and construction projects

Applicable Scenarios

It is arranged on the frame, boom or bucket linkage of XCMG ZL50G and ZL50GL wheel loader, connecting hydraulic valve block and hydraulic cylinder, widely used in quarry, aggregate yard and earthwork construction sites.

advantage

▪ OEM length, fittings and bending dimension match original parts for direct installation
▪ Multi-layer steel wire reinforcement provides high pressure resistance against bursting
▪ Oil-resistant inner tube and wear-resistant outer cover resist abrasion and oil erosion
▪ Firmly crimped fittings with precise sealing surface reduce leakage at hose root
▪ Proper flexibility accommodates linkage swing and avoids tearing from tension
▪ Good weather resistance slows aging under outdoor working conditions
▪ Compatible with other hydraulic hoses, valves and cylinders for stock management
▪ Pressure pulse inspection screens defective hoses to guarantee stable hydraulic circuit

FAQ 

Q：Can the hose with fine surface cracks keep working?
A：Operation is forbidden. Cracks will propagate and cause burst under hydraulic pressure. Replace immediately.

Q：How to handle leaking connector?
A：Check sealing washer and retighten. Replace the whole hose if leakage occurs at crimp area.

Q：What does swollen hose indicate?
A：Broken steel wire reinforcement, high-risk failure. Do not use.

Q：Can I reuse old fittings with cut rubber tube?
A：Not recommended. Re-crimped joints cannot meet original fatigue standard.

Q：How to store spare hose assembly?
A：Store in cool shaded area, avoid permanent kinks and heat source.

Q：Is weak cylinder movement caused by this hose?
A：Check hydraulic pump and valve first, then check whether the hose is flattened and blocked.

Q：How often to inspect under heavy mine load?
A：Visual inspection before each shift, check bulges, cracks, leakage and exposed wire.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories