252101772 bucket for XCMG ZL50G/ZL50GL Wheel Loader

252101772 bucket for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 252101772 bucket for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Bucket, Part No.252101772, fits XCMG ZL50G, ZL50GL wheel loader. It is an original matched bucket assembly, including bucket body, main cutting edge, side plates, tooth adapters and connecting lugs, compatible with matched bucket tooth sets.

Product Detail

Product Tags

description

This 252101772 bucket is fabricated by welding high-strength wear-resistant steel plates. Optimized bucket shape enables smooth feeding and high fill factor, reducing material adhesion and residual materials during unloading. Key stressed areas such as bucket root, cutting edge and lugs are thickened and reinforced. Welding workmanship is standardized with full uniform welds for outstanding impact and bending resistance. Tooth adapters, cutting edge and side plates adopt modular design; worn components can be replaced separately instead of the whole bucket to cut maintenance cost. Each bucket passes weld flaw detection and dimension inspection before delivery to ensure assembly accuracy and structural stability. Built for harsh construction sites with sand and gravel impact, it helps the loader resume loading work quickly after replacement.

product parameters

Product Name: Bucket Assembly
Part No.: 252101772
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Bucket Type: General Earthmoving Bucket
Material: High strength wear-resistant steel Q355 / NM400
Matching parts: Middle bucket tooth, left tooth, right tooth, tooth adapter, lock pin, circlip
Connection Type: Hinge lug connection
Working Condition: Earth excavation, sand & gravel bulk loading, material transfer
Inspection Items: Dimension inspection, weld flaw detection, assembly fit verification

Applicable Scenarios

It is compatible with XCMG ZL50G and ZL50GL loaders, widely used in aggregate yards, construction sites, road foundation works and bulk material yards. Suitable for earth digging, gravel loading, site leveling and bulk material transfer. It works well for loose soil and gravel, and is not recommended for breaking large hard rocks or heavy quarry work.

advantage

- Original matching size with accurate hinge lug and pin holes, direct fit for boom and tilt linkage without cutting or modification
- Optimized curved bucket profile for smooth feeding and high fill rate, less material sticking and clean dumping
- Reinforced cutting edge, bottom plate and connecting lugs for good impact resistance and longer service life
- Modular wear part design, cutting edge, tooth adapters and side plates can be replaced separately for cost-effective maintenance
- Mature welding and stress relief process, resistant to crack and deformation under continuous heavy load for long-time field operation
- Fully compatible with original bucket teeth and adapters of ZL50G / ZL50GL, intact old spare parts can be reused
- Versatile earthmoving bucket with large market circulation, normally in stock for fast emergency supply

FAQ 

Q：Can bucket 252101772 handle large rocks?
A：This is a general earthmoving bucket for loose soil and gravel. Large hard rocks create heavy impact load which may crack bucket welds. A reinforced rock bucket is recommended for rock working conditions.

Q：Should I weld the cracked bucket or replace the whole assembly?
A：Minor cracks on non-load-bearing areas can be welded professionally. If cracks appear on lugs, bucket root welds or bottom plate, the load-bearing structure is damaged. Bucket assembly replacement is recommended for safety.

Q：Can I reuse old bucket teeth and adapters on this new bucket?
A：Yes, if the teeth, adapters and pins are free from severe deformation and damage. Clean sand and rust and check fit clearance before assembly.

Q：What safety and installation notes for bucket replacement?
A：Follow lifting safety regulations. Align hinge lugs, clean pins and apply grease. Test boom and tilt movements repeatedly after installation to check jamming and interference before operation.

Q：How to slow down cutting edge wear?
A：Keep bucket teeth sharp to absorb main impact. Avoid striking hard ground or rocks directly with cutting edge. Check edge wear regularly and prepare spare cutting edge.

Q：What inspection is required on bucket arrival?
A：Check part number, bucket deformation, weld defects, lug hole spacing and welding firmness of tooth adapters. Confirm all dimensions before lifting installation.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories