253000538 bucket assembly for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Product Name: Standard Bucket Assembly
Part No.: 253000538
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Bucket Type: General earthmoving bucket
Material: High strength wear-resistant steel Q355 / NM400
Matching parts: Middle bucket tooth, left tooth, right tooth, tooth adapter, lock pin, circlip
Connection Type: Hinge lug connection
Working Condition: Earth, sand, gravel and bulk material loading & transfer
Inspection Items: Dimension inspection, weld flaw detection, assembly fit verification

Applicable Scenarios

It matches XCMG ZL50G and ZL50GL loaders, widely used in aggregate yards, construction sites, road foundation projects and bulk stock yards. Suitable for earth digging, sand loading, site leveling and bulk material handling. It is the standard bucket for 5-ton wheel loaders and not recommended for heavy rock breaking with large boulders.

- Original matching dimension with accurate hinge lug and pin holes, direct fit for boom and tilt linkage without cutting or modification
- Optimized curved bucket profile for smooth feeding and high fill rate, less material sticking inside the bucket
- Reinforced cutting edge, bottom plate and lugs for better impact resistance and longer service life
- Modular design for cutting edge, tooth adapters and side edges; worn parts can be replaced individually for cost saving
- Professional welding and stress relief treatment, anti-crack and anti-deformation under continuous heavy workload
- Fully compatible with original bucket teeth of ZL50G / ZL50GL, existing wear parts can be reused
- Universal earthmoving bucket for wide applications, normally in stock for fast site emergency delivery

FAQ 

Q：Can this 253000538 bucket be used for digging big rocks?
A：This is a standard earthmoving bucket for soil, sand and gravel. Large hard rocks will bring heavy impact load and easily crack the bucket body. A heavy-duty rock bucket is recommended for rock conditions.

Q：Should I repair cracked bucket by welding or replace the whole assembly?
A：Minor cracks on non-load-bearing areas can be welded properly. If cracks appear on lugs, root welds or main bottom plate, the load-bearing structure is damaged. Replace the bucket assembly for safety.

Q：Can I reuse old bucket teeth and adapters on the new bucket?
A：Yes, if the old teeth, adapters and pins are not severely deformed or broken. Clean rust and sand before assembly.

Q：What should I pay attention to during bucket replacement?
A：Follow lifting safety rules. Align hinge lugs, clean pins and fill grease. Test boom and tilt movements repeatedly after installation to check jamming or interference before operation.

Q：How to slow down the wear of bucket cutting edge?
A：Keep bucket teeth sharp to take the main impact. Avoid striking hard ground or rocks directly with the cutting edge. Inspect edge wear regularly and prepare spare cutting edge.

Q：Can this bucket fit other XCMG loader models?
A：Part No.253000538 is specially designed for ZL50G and ZL50GL. The boom pin distance and lug width differ among models. Do not interchange without checking part number.

Q：What inspections are required after receiving a new bucket?
A：Verify part number, check deformation and weld defects, measure lug hole spacing and confirm the tooth adapters are firmly welded before lifting installation.