252102160 bracket for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Part No：252102160
Product Type：Support Bracket
Applicable Equipment：XCMG ZL50G / ZL50GL 5 Ton Wheel Loader
Core Technology：Alloy steel plate bending & rib reinforcement welding, shot blasting pretreatment + high temperature anti-rust paint coating
Material：High strength alloy steel
Mounting Hole Quantity：4
Hole Diameter：13mm
Hole type：Through reamed mounting hole
Overall Size：340mm × 172mm ×14mm
Plate Thickness：14mm
Static Bearing Load：Max 1400kg
Working Temperature Range：-40℃ ~ +480℃
Weight：9.7kg
Installation：Bolt fastening
Application：Support and fix exhaust & air pipeline assembly, reduce vibration transfer, limit swing of pipeline assembly during loader operation

• High-strength thick alloy steel plate design, high rigidity and strong bearing capacity, outstanding impact resistance.
• Reinforced rib welding on stress points, effectively resist fatigue fracture caused by long-term cyclic vibration.
• High-temperature anti-rust coating protects steel substrate from mud, moisture and dust corrosion, extend service life.
• OEM standard hole spacing and outline dimension, perfectly match original mounting position, simple bolt-on installation.
• Good high temperature tolerance, suitable for installation nearby high-temperature exhaust assemblies.
• Optimized structural layout, no interference with surrounding rubber hoses and pipelines after installation.
• Stable mechanical property, not easy to deform under sudden impact load during shoveling and loading.
• Batch inspection for welding quality and dimension before delivery, avoid assembly mismatch problems on site.

FAQ 

Q：What signs mean the bracket needs replacement?
A：Visible cracks on plate or weld seam, severe bending deformation, broken mounting lugs, heavy rust thinning which reduces load-bearing strength.

Q：What should be noted during bracket installation?
A：Clean the mounting base surface before installation; align bolt holes; tighten all fixing bolts evenly; check alignment of supported assembly after fastening. Do not over-torque bolts to prevent plate cracking.

Q：What are common causes of bracket damage?
A：Long-term vibration fatigue; collision impact during operation; serious rust thinning of steel plate; overload of mounted components; excessive bolt tightening torque.

Q：Can cracked bracket be repaired and reused?
A：Not recommended. Weld repair can only provide temporary support. New cracks will quickly reappear under continuous vibration. Replace new bracket once cracks or serious deformation appears.

Q：How to inspect bracket during daily maintenance?
A：Check bracket surface, weld seams and bolt tightness before heavy-load operation. Focus inspection on weld seams and bending stress areas, these positions are prone to cracking.

Q：What failures will a failed bracket cause?
A：Cracked or deformed bracket loses supporting capacity. The exhaust and air pipe assembly will shake violently, which may cause loosening of pipe joints, air leakage and secondary damage to connected pipelines.

Q：What maintenance suggestions for the bracket?
A：Regularly inspect bracket and fixing bolts. Clear accumulated mud and dust on surface. Treat surface rust timely to prevent continuous plate thinning.