252108093 bracket for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Part No：252108093
Product Type：Equipment Fixing Bracket
Applicable Equipment：XCMG ZL50G / ZL50GL 5 Ton Wheel Loader
Core Technology：Steel plate stamping & welding, stress relief process
Material：Q235 thick carbon steel plate
Surface Treatment：Sandblasting + Anti-rust epoxy paint
Mounting Hole Quantity：4 mounting holes
Hole Diameter：13mm
Overall Dimension：320mm × 185mm × 110mm
Allowable Dynamic Load：1200N
Working Temperature Range：-30℃ ~ +70℃
Installation Method：Bolt fixed assembly
Application：Support and fix air pre-cleaner or pipeline assembly of wheel loader

・Thick steel plate structure plus reinforcing rib design, high rigidity and strong impact resistance, resisting long-term vibration fatigue on construction sites.
・Stress relief welding process effectively reduces internal stress, avoiding cracking after long time impact.
・Sandblasting and epoxy anti-rust coating improves corrosion resistance, suitable for humid, dusty and muddy outdoor construction environment.
・Precise punching and hole position, fully consistent with OEM mounting positions, easy bolt alignment during replacement.
・Integrated structure, simple installation, no extra modification required, fast replacement and less machine downtime.
・Stable supporting effect, reduce shaking and friction of mounted components, extend service life of pre-cleaner and related pipelines.

FAQ 

Q1：What signs indicate that the bracket needs replacement?
A1：Visible cracks on the bracket, serious deformation, broken welds, corroded holes with enlarged aperture. If the bracket fails, the mounted air pre-cleaner or pipeline will shake violently and may fall off during operation.

Q2：What should be noted during bracket installation?
A2：Clean the mounting surface of the loader frame. Use matched high-strength bolts and spring washers. Tighten bolts in diagonal sequence to prevent uneven stress. Check tightness again after 2~3 hours of operation.

Q3：What are the common causes of bracket damage?
A3：Long-term continuous vibration fatigue; excessive impact load; rust corrosion from mud and rainwater; bolt loose leading to additional alternating stress.

Q4：Can I weld and repair a cracked bracket?
A4：Temporary welding repair is not recommended. Welding will change the local material stress state. After repair, it is easy to crack again under impact vibration, there is risk of parts falling off during operation. It is better to replace the new bracket directly.

Q5：How to carry out daily inspection and maintenance of the bracket?
A5：Regularly check the bracket surface for cracks, rust and weld peeling. Inspect the tightness of fixing bolts. Clean accumulated mud and dust on the bracket surface to slow down corrosion.

Q6：Can this bracket be used for other brands or other XCMG loader models?
A6：This bracket is specially customized for ZL50G / ZL50GL. The hole spacing and overall size are exclusive. It cannot be directly installed on other models without modification.