253000646 pressing plate for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

- Product Name: Pressing Plate
- Part Number: 253000646
- Applicable Equipment: XCMG ZL50G, ZL50GL Wheel Loader
- Main Material: Stamped part of Q235 carbon steel plate
- Manufacturing Process: Plate cutting, punching, bending forming, deburring, shaping
- Surface Treatment: Sandblasting derusting, anti-rust primer, weather-resistant topcoat for construction machinery
- Installation Position: Assembly position of guard plate, guardrail, pipeline and wiring harness
- Fastening Method: Clamping and fixing with bolts and gaskets
- Supply Note: Single pressing plate supplied; bolts, flat washers and spring washers are separately optional parts
- Functions: Clamp and limit guard plates, guardrails, hydraulic hoses and wiring harnesses, anti-loosening and anti-abrasion against vibration
- Working Conditions: Sand and stone yards, mines, earthwork infrastructure, material transfer yards and other heavy-duty vibrating operation sites

• Consistent hole spacing and bending size with original parts, good interchangeability, direct replacement without grinding modification
• Adequate plate thickness and high rigidity, not easy to bend under clamping force, stable and reliable limiting performance
• Edge deburring treatment, will not cut hose and harness sheath during installation to protect pipelines
• Reliable anti-corrosion coating, resistant to sediment and rain corrosion, longer service life outdoors
• Compact independent part, single-piece replacement, low maintenance cost and small storage space
• Matched with the whole side protection system of ZL50G/GL, compatible with guardrails, guard plates and platforms
• High consistency of stamping forming, small dimensional deviation in the same batch, convenient mass installation
• Effectively share bolt load and reduce fastener loosening failures caused by long-term vibration

FAQ 

Q1: Can this pressing plate fit ZL50GN loader?
A1: Part No.253000646 is specially designed for ZL50G and ZL50GL. ZL50GN has different mounting positions for protection structure, direct use is not recommended. Please check old part number before ordering.

Q2: Can a slightly deformed pressing plate keep working?
A2: Slight deformation will change the angle of clamping surface, resulting in insufficient clamping force, loosening and abnormal noise. It is recommended to replace it with a new one to prevent pipeline wear and damage.

Q3: Are matching fastening bolts included in the package?
A3: Standard package only contains the pressing plate. Bolts and gaskets are optional parts. You can order fasteners separately if needed.

Q4: Shall I replace the pressing plate if paint peels off and rust appears?
A4: It can be reused after polishing and repainting for light rust. If rust has thinned the steel plate or cracks appear, replace it in time to avoid clamping failure.

Q5: What should be noted during installation?
A5: Align the clamping surface with the guard plate or pipeline to be fixed, tighten bolts evenly and avoid bending the plate by unilateral force. Do not over-tighten to prevent plate failure.