253000649 step plate for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

- Product Name: Step Plate
- Part Number: 253000649
- Applicable Equipment: XCMG ZL50G, ZL50GL Wheel Loader
- Main Material: Stamped and bent part of Q235 anti-slip checkered steel plate
- Manufacturing Process: Plate cutting, punching, bending forming, deburring, shaping calibration
- Surface Treatment: Sandblasting derusting, anti-rust primer, weather-resistant topcoat for construction machinery
- Installation Position: Stepping position on loader side boarding platform and ladder
- Fastening Method: Bolt locking on support bracket
- Supply Note: Single step plate supplied; bolts, flat washers and spring washers are optional separate parts
- Functions: Load-bearing for boarding, anti-slip and wear-resistant, disperse stepping impact and ensure safe access
- Working Conditions: Sand and stone yards, mines, earthwork projects, mixing plants, material transfer yards

• Consistent shape and mounting holes with original spare parts, good interchangeability, direct installation without secondary processing
• Checkered anti-slip surface with high friction coefficient, stable anti-slip performance in rainy and muddy conditions to reduce slipping hazards
• Thick steel substrate with excellent rigidity, resistant to bending and collapse after long-time stepping for stable load bearing
• Precision deburred edge treatment without sharp corners to avoid injury and shoe damage
• Double-layer anti-corrosion coating, resisting sediment erosion and rain rusting to extend outdoor service life
• Split small independent part, single-piece replacement, low maintenance cost and small storage space
• Perfectly matched with ladders, platforms and guardrails of ZL50G/ZL50GL series
• High stamping consistency, small dimensional deviation in one batch and high efficiency for bulk replacement

FAQ 

Q1: Can this step plate be used on ZL50GN?
A1: Part No.253000649 is made for ZL50G and ZL50GL. ZL50GN has different platform bracket structure and unmatched mounting points. Direct interchange is not recommended. Verify old part number before ordering.

Q2: Can I keep using it if anti-slip texture is worn flat?
A2: Anti-slip performance drops sharply once patterns wear off. It is easy to slip on wet ground and brings safety risks. Timely replacement is recommended.

Q3: Are fixing screws included in the package?
A3: Standard package only contains the step plate. Bolts and gaskets are optional parts. You may order fasteners separately.

Q4: How to handle slight paint peeling and rust?
A4: Polish light rust and re-spray primer and engineering yellow topcoat. Replace immediately when the plate becomes thin, perforated or cracked.

Q5: What should be noted during installation?
A5: Keep anti-slip surface upward and fit closely to the bracket. Tighten bolts evenly in diagonal order to prevent twisting. Test by stepping after installation and confirm no looseness.