8N-1726 engine connecting rod CAT spare part

Short Description:

478-5318 CAT connecting rod bearing, sliding bearing shell for connecting rod big end. It is installed between connecting rod and crankshaft journal, forms hydrodynamic oil film with engine oil, withstands combustion impact load and reduces friction wear, serving as key wear-resistant part for engine overhaul.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from alloy steel, featuring 9-degree wide taper big end and 2.00 inch wrist pin bore. The rod body, big end and small end bores are precision bored. It is designed for CAT 3406, 3408, 3412, C15, C16 heavy-duty diesel engines. It fits 980C wheel loaders, 825C/826C compactors, SR4 generator sets and heavy truck engines. The small end with bushing connects piston via piston pin, and the big end matches 9Y-9497 bearing shells for crankshaft journal. It bears high temperature, alternating impact, tension and compression loads during power stroke, and is key overhaul replacement part for 3406 / C15 series engine.

Part number: 8N-1726
Brand: CAT
Type: engine connecting rod
Structure: 9° wide taper
Wrist pin bore: 2.00 inch
Fit: 3406, 3408, 3412, C15, C16 engine, 980C wheel loader, 825C compactor, SR4 generator set, heavy truck
Material: alloy steel
Processing: die forging, quenching and tempering, precision boring, wide taper machining, oil passage cleaning, anti-rust surface treatment
Matching parts: 9Y-9497 connecting rod bearing, piston pin, piston pin bushing, connecting rod bolt, rod cap

Advantages:

1. Forged alloy steel with quenching and tempering treatment, excellent impact and fatigue resistance for long heavy load of C15/3406
2. 9° wide taper big end for uniform stress distribution, reducing cracking and deformation risk
3. High-precision bore machining with stable coaxiality, minimizing uneven bearing wear
4. OEM interchangeable, replaces 0R0905, good compatibility with crankshaft, piston pin and matched bearing shells

FAQ 

Q: What faults will be caused by damaged connecting rod?
A: Connecting rod knocking noise and low oil pressure. In severe cases, broken rod penetrates cylinder block and destroys crankshaft, leading to total engine failure.

Q: Can this connecting rod be purchased separately?
A: It can be purchased separately. Replace rod, bearings and bolts together for the same cylinder during overhaul.

Q: Is it recommended to replace connecting rod bearings together?
A: Yes. Matched bearing part number 9Y-9497. Worn old bearings have excessive clearance and may cause bearing seizure.

Q: Where does failure usually occur?
A: Transition fillet of rod body, big end taper surface and stress zone of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us