801100343 Oil cup M10×1 for XCMG RP705 paver spare parts

Short Description:

Idler wheel is a core component of paver crawler chassis. It guides the crawler track, cooperates with tensioning device to keep proper track tension, restricts track path and prevents derailment.

Product Detail

Product Tags

description

This grease nipple adopts M10×1 fine thread, integrally machined from high-quality steel with anti-rust surface treatment and compact structure. It can be quickly connected with grease gun. The one-way valve structure prevents grease backflow and sediment ingress. It is convenient for grease filling during routine maintenance, protects moving pairs such as chassis pins and bearings, reduces dry friction and rust, and is an essential lubrication fitting for paver maintenance.

product parameters

Part No.:801100343
Specification:M10×1 (fine thread)
Type:Straight grease nipple
Material:High-quality carbon steel
Thread Type:External thread
Structure:Built-in one-way valve
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Suitable for paver chassis pins, track rollers, idlers and other positions requiring regular grease filling, convenient for grease gun injection to lubricate moving parts continuously.

advantage

▪ M10×1 fine thread for tight engagement and anti-loosening
▪ Built-in one-way valve, anti-backflow and sand ingress prevention
▪ Integral carbon steel structure, high strength and anti-breakage
▪ Standard straight type, easy to connect with grease gun for fast filling
▪ Anti-rust surface treatment, suitable for dusty and humid construction site

FAQ

Q:How to deal with blocked grease nipple?
A:Clean the outlet with thin needle. Replace it if cleaning fails, avoid high-pressure grease injection.

Q:Can a grease nipple with stripped thread keep using?
A:Stripped thread causes loosening and grease leakage. Replace it directly.

Q:Can angled grease nipple replace this straight one?
A:It can be replaced if thread specification matches. Original straight type is recommended for operation space.

Q:How much grease should be injected?
A:Stop filling when fresh grease slightly oozes out. Overfilling will damage seals.

Q:Is regular inspection required after installation?
A:Yes, check for bending, blockage and loosening during maintenance, replace damaged ones timely.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us