803088472 XCMG XS365 road roller hydro-cylinder of support spare parts

Short Description:

Fit for XCMG road roller XS365, suitable for large‑scale subgrade fill and pavement compaction construction. Used to replace original hydro‑cylinder of support with scratched piston rod, damaged oil seal, worn cylinder tube and poor pressure‑holding performance.

Send email to us

Product Detail

Product Tags

description

Part number: 803088472
Part name: hydro-cylinder of support spare parts
Unit name: hydraulic support system
Applicable Models: XCMG XS365 road roller

Hydro‑cylinder of support is the dedicated hydraulic actuator for large‑tonnage road roller. It completes mechanical support and limit action by hydraulic thrust, and bears radial and axial load under working condition. Scratched cylinder tube, worn piston rod and aging oil seal will result in external oil leakage, pressure relief and weak supporting force, directly affecting mechanical locking and operation safety.

*Due to the wide variety of products, the pictures displayed may not match the actual ones, and the part numbers are mainly used.

Number	Parts Name	Material Encoding
1	ANELLO DI POLVERE	860509113
2	U RING	860509066
3	ANELLO DI SICUREZZA	860500412
4	SUPPORTING RING	860500413
5	O-RING	860509067
6	O-RING	860509068

=======================================

advantages

Hinge dimension, stroke and port positions are consistent with original part for direct installation without modifying frame and pipelines.
Finely‑processed cylinder inner wall and wear‑resistant coating on piston rod resist scratch caused by site sand and gravel.
Matched sealing components feature high‑pressure and aging resistance to reduce leakage risk and realize stable pressure‑holding performance.
Ready‑to‑use cylinder assembly avoids on‑site disassembly repair and shortens equipment downtime.

FAQ

Q: Can slight external oil leakage be solved only by replacing oil seal?
A: If piston rod is scratched and worn, leakage will recur quickly even with new seal, replace assembly after condition evaluation.
Q: What causes poor pressure‑holding after new cylinder installation?
A: Check internal leakage of hydraulic circuit, confirm complete air exhaust and eliminate hinge jamming.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.