803175736 hose assembly for XCMG RP705 paver spare parts

Short Description:

Right Hydraulic Pipe Ⅱ, Part No.200635170, is a high-pressure hydraulic hose assembly for the right travel circuit of the paver

Product Detail

Product Tags

description

This hose assembly is crimped integrally with steel wire reinforced high-pressure hose and pre-installed connectors at both ends, which can connect hydraulic valves, cylinders, motors and other hydraulic parts. During paving, it bears continuous hydraulic pulse pressure, chassis vibration, high asphalt temperature and gravel abrasion. The outer rubber cover will age, wear and crack gradually, resulting in oil leakage, bulging or bursting. Damaged hose causes pressure loss and malfunction, which affects paving work and requires regular inspection and replacement.

product parameters

Part No.:803175736
Product Name:Hose Assembly
Structure:Steel wire reinforced high-pressure hose + crimped hydraulic connectors
Outer Material:Wear-resistant and anti-aging rubber cover
Working Medium:Anti-wear hydraulic oil
Fluid Temperature:-20℃~+80℃
Function:Deliver high-pressure hydraulic oil, connect the paver hydraulic circuit, transfer hydraulic power and ensure stable operation of hydraulic cylinders and motors

Applicable Scenarios

Suitable for the hydraulic system of XCMG RP705 paver, used for oil transmission in hydraulic branches such as travel, leveling, hopper and material feeding.

advantage

▪ Original crimped assembly with matched length and fitting angle, ready for direct installation
▪ Steel wire reinforcement structure, stable pressure resistance against pressure pulses
▪ Outer rubber resists asphalt corrosion and gravel abrasion
▪ Good flexibility, adapts to chassis vibration and not easy to break
▪ Quickly eliminate oil leakage and restore hydraulic pressure after replacement

FAQ

Q:Does a slight scratch on the hose surface require replacement?
A:Shallow surface scratch without steel wire exposure can be monitored. Replace immediately if steel wire is exposed.

Q:Can hose assemblies with different part numbers be interchanged?
A:No. They differ in length, fitting angle and inner diameter. Install according to part number.

Q:Can I just replace the O-ring if oil leaks at the connector?
A:Yes if the fitting thread is intact. Replace the whole hose if the fitting is deformed or loose.

Q:What should be avoided during hose installation?
A:Do not twist or bend sharply, leave expansion allowance, keep away from sharp stones and hot parts.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us