805141422 M6×16 screw for XCMG RP705 paver spare parts

Short Description:

Cover Plate, Part No.201003706, is an original protective cover plate for XCMG RP705 medium crawler paver. It shields hydraulic and drive parts, blocks asphalt mixture, gravel and muddy water, and enables convenient inspection.

Product Detail

Product Tags

description

This screw is made of alloy steel with heat treatment and precise thread rolling, finished with anti-rust coating. It generates clamping force to fix covers and brackets. Under continuous vibration, high temperature and grit, the screw may suffer thread stripping, head wear, fracture and rust. Loose guards will shift and cause collision noise, even fall off and damage internal parts. It is widely used on chassis, auger and protective assemblies.

product parameters

Part No.:805141422
Product Name:Screw
Specification:M6×16
Material:Alloy steel, heat treated
Processing:Thread rolling, turning, anti-rust treatment
Working Condition:Continuous vibration, high temperature, dust and grit
Function:Fasten cover plates, guards and small brackets, prevent loosening and displacement

Applicable Scenarios

Used for fixing covers, guards, small brackets and pipe clamps on XCMG RP705 paver. Replace when threads stripped, broken, rounded or heavily rusted.

advantage

▪ Standard M6×16 size with precise threads for smooth engagement
▪ Heat-treated alloy steel, high tensile strength and vibration resistance
▪ Anti-rust surface for humid and dusty construction sites
▪ Wide application for guards and small brackets
▪ Easy to install and replace during maintenance

FAQ

Q:Can slightly rusted screws continue to be used?
A:Light surface rust with intact threads is acceptable for short-term use. Replace if threads are pitted.

Q:Can M6×16 and M6×20 screws substitute each other?
A:No. Different length leads to insufficient thread engagement and loosening under vibration.

Q:Should the screw be tightened as hard as possible?
A:No. Tighten to specified torque. Over-tightening causes thread stripping or breakage.

Q:What if the screw head is rounded and slips?
A:Do not reuse it, replace with a new screw.

Q:Is a washer mandatory?
A:Not required for smooth, low-load surfaces. Washers are recommended for thin plates and high-vibration positions.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us