Guide sleeve for XCMG RP705 paver spare parts

Short Description:

Composite bushing 80×85×25 is a multi-layer self-lubricating sliding bushing. It serves as sliding support bearing for pin and hinge joints, bears radial load and reduces friction and wear.

Product Detail

Product Tags

description

This guide sleeve is precision machined from high-strength bronze or alloy steel. Internal seal grooves are reserved for main seal, dust seal and support ring. It features high concentricity and smooth wear-resistant bore. It keeps the piston rod centered during reciprocating movement, absorbs side load and prevents eccentric scratching of chrome layer, reducing uneven wear of seals. It is widely used on tension cylinder, hopper cylinder and screed lifting cylinder, a key replacement part for cylinder overhaul, usually replaced together with piston rod and full seal kit.

product parameters

Product Name:Guide Sleeve
Material:Bronze / Alloy structural steel
Processing:Precision turning, honing
Matching Parts:U-cup seal, dust seal, support ring
Working Medium:Hydraulic oil
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Installed on the rod end of paver tension cylinder, hopper cylinder and screed lifting cylinder, to guide and center piston rod, bear side load and protect sealing system.

advantage

▪ Bronze / alloy steel material, strong side load capacity and long service life
▪ Honed inner bore, high surface finish, no damage to rod chrome layer
▪ Integrated seal grooves, compact fit with full seal set
▪ Keep rod concentric, reduce eccentric wear and external leakage
▪ Standard original dimension, good interchangeability with cylinder barrel and rod

FAQ

Q:What are symptoms of worn guide sleeve?
A:Piston rod shake, rapid unilateral seal wear and external oil leakage, jitter during movement.

Q:Is guide sleeve the same as support ring?
A:No. Guide sleeve is rigid metal support; support ring is polymer wear ring, they work together.

Q:Can scratched guide sleeve be reused?
A:Scratches and burrs will continuously damage rod and seals, replacement is required.

Q:What to note during installation?
A:Remove burrs, lubricate seals with hydraulic oil, use installation sleeve to protect seal lips.

Q:Does external leakage always mean broken guide sleeve?
A:Check seals first. Inspect guide sleeve wear and concentricity if leakage remains after seal replacement.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us