805338321 Washer 20 for XCMG RP705 paver spare parts

Short Description:

Movable Plate, Part No.200635108, is a swingable protective component for XCMG RP705 medium crawler paver.

Product Detail

Product Tags

description

This washer is stamped from carbon steel plate with flat surface and standard dimension. It is installed between bolt head/nut and workpiece to spread preload and prevent surface damage under heavy vibration. After long service in hot asphalt and grit environment, it may flatten, crack or thin due to rust. Failed washer leads to loose bolts and surface damage, so replacement is required.

product parameters

Part No.:805338321
Product Name:Washer
Specification:20 (for M20)
Material:Carbon steel
Processing:Stamping, anti-rust treatment
Working Condition:Continuous vibration, impact load, high temperature and asphalt dust
Function:Distribute fastening pressure, protect workpiece surface and assist anti-loosening

Applicable Scenarios

Used for all M20 bolt joints of XCMG RP705 paver, such as brackets, guards, auger supports and hinge plates. Replace when flattened, cracked or heavily rusted.

advantage

▪ OEM standard size, perfectly matched with M20 bolts
▪ Flat surface for uniform pressure distribution
▪ Anti-rust coating for harsh paving site environment
▪ Compact and easy to install for various M20 fastening positions
▪ Low-cost spare part to protect expensive structural plates and brackets

FAQ

Q:Can flat washers and spring washers be used together?
A:Yes. Flat washers protect surfaces while spring washers provide anti-loosening effect.

Q:Can slightly rusted washers keep working?
A:Light surface rust without deformation is acceptable. Replace if pitted or thinned.

Q:Is there a front or back side for flat washers?
A:No. Just keep the flat side against the workpiece.

Q:Can I tighten M20 nuts without washers?
A:Not recommended. Concentrated pressure will damage parts and bolts loosen easily.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us