813400501 hose ass’y XCMG XS135 road roller spare parts

Short Description:

Hose ass’y is a key component of road‑roller hydraulic system. It conveys hydraulic oil and delivers pressurized oil to actuators such as vibration motor and steering cylinder to guarantee normal traveling, vibration and steering performance.

Send email to us

Product Detail

Product Tags

description

Part number: 813400501
Part name: hose ass’y
Unit name: power system
Fit for XCMG road roller XS135, suitable for rural road construction, subgrade backfill and site leveling work. Used to replace original hose ass’y with bulge, leakage and sheath damage.

Cracked outer rubber layer, bulged steel wire layer, joint leakage and outer‑layer wear will cause hydraulic oil leakage and system pressure drop. Hose burst may occur under severe condition, resulting in weak machine movement and interrupting compaction work.

Number	Parts Name	Quantity	Material Encoding
1	BOLT M10×25	4	805004763
2	FILTER TO PUMP FUEL LINE	1	228304450
3	GHIERA φ16-11	1	803300235
4	TANK TO FILTER FUEL LINE	1	228304444
5	WORM GEAR CLAMP	2	800151584
6	BOLT M8×20	6	805004756
7	GUARD	1	228304462
8	CONNECTOR	1	803103852
9	HOSE ASS’Y	1	813400501
10	NUT M18×1.5	1	805238951
11	ELBOW	1	228300882
12	NUT	1	228300554
13	DRAIN PIPE MOUNTING BRACKET	1	228304439
14	BOLT M8×25	3	805004717
15	WASHER 14	2	805300024
16	FUEL CONNECTORM14-12	2	230202102
17	FILTER TO PUMP FUEL LINE	2	228304450
18	DIPSTICK INSTALLATION BRACKET	1	228304793
19	NUT M8	1	805238400

====================================

advantages

Length, joint specification and crimp dimension fully match original machine for direct installation without on‑site modification.
Oil‑resistant inner rubber and high‑strength steel‑wire braided layer resist high pressure and pulse impact, suitable for road‑roller hydraulic working condition.
Wear‑resistant and anti‑aging outer rubber resists sand‑stone friction, sunlight and rain for harsh construction‑site environment.
Hydraulic pipe fitting for road roller, convenient for bulk stocking and fast on‑site replacement, meet spare‑parts stocking demand for overseas projects in Southeast Asia and Africa.

maintenance & replacement

Shut down machine before disassembly and release residual hydraulic pressure to avoid injury caused by high‑pressure oil ejection.
Avoid twisting and excessive bending during installation, reserve sufficient slack and keep hose away from high‑temperature parts and sharp edges.
Align joint threads properly, forced threading is forbidden to prevent thread damage. Start machine after fully tightening.
Run machine under no‑load condition after installation, verify no leakage and friction interference on joints and hose body.
Do not reuse hose with bulge, exposed steel wire, multiple cracks and persistent joint leakage after wrapping repair, replace hose ass’y directly.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.