819906011 side tooth for XCMG ZL50G/ZL50GL Wheel Loader

819906011 side tooth for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 819906011 side tooth for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Side Tooth Assembly, Part No.819906011, fits XCMG ZL50G, ZL50GL wheel loader. It is the bucket side tooth assembly installed on both ends of the bucket, including bucket tooth, tooth adapter, lock pin and circlip.

Product Detail

Product Tags

description

This 819906011 side tooth assembly is precision cast from high-chromium wear-resistant alloy with quenching and tempering treatment. The tooth tip achieves high hardness while the root maintains good toughness to balance wear resistance and impact resistance and reduce chipping risk. The special side-cutting profile guides material flow and prevents stone jamming beside the bucket, protecting side edge plates. The matched tooth adapter absorbs impact force and slows down wear of tooth base. It is delivered as a complete assembly with all fasteners for direct installation. Each batch passes visual flaw inspection and hardness sampling to avoid casting defects such as blowholes and shrinkage cavities. It is a frequently replaced side wear part for earth and gravel mixed materials.

product parameters

Product Name: Bucket Side Tooth Assembly
Part No.: 819906011
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Material: High-chromium wear-resistant alloy
Process: Precision casting, tip quenching & tempering
Components: Side tooth, tooth adapter, lock pin, circlip
Installation: Pin & circlip locking type
Working Condition: Earth excavation, sand, gravel and bulk material transfer
Inspection Items: Visual flaw detection, hardness test, assembly fit verification

Applicable Scenarios

It fits standard and reinforced earth buckets of XCMG ZL50G and ZL50GL loaders, widely used in construction sites, aggregate yards and road foundation projects for loose soil and gravel mixtures. It is not recommended for long-term heavy rock quarrying, as continuous rock impact may fracture the side tooth.

advantage

- Original matched tooth profile with standard fit clearance for smooth assembly, no jamming or falling off
- High-chromium alloy quenching process delivers longer service life than ordinary carbon steel side teeth
- Side guiding tooth shape diverts materials, reduces stone jamming and protects bucket side plates
- Complete assembly with all accessories included, ready for installation upon arrival
- Tooth adapter cushions impact and reduces wear on tooth base and bucket side structure
- Balanced toughness, less brittle fracture under normal gravel impact
- Sufficient stock in market for quick emergency replacement on site

FAQ 

Q：Can dull side teeth keep working?
A：Short-time operation is allowed, but side cutting performance drops and side plates are exposed to abrasion. Timely replacement is recommended.

Q：Can this side tooth be used on rock bucket?
A：This is earth-type side tooth with limited impact resistance. It tends to break under heavy rock load. Special heavy-duty rock side teeth are required.

Q：Can pins or circlips be purchased separately?
A：Yes, they are standard spare parts. Make sure the circlip is fully seated to prevent tooth dropping caused by vibration.

Q：What should we notice during side tooth installation?
A：Clean sand and rust inside tooth base, align pin holes of adapter and base, drive pin in fully and lock the circlip.

Q：What causes frequent side tooth breakage?
A：Common reasons include prying hard boulders, side impact on rocks, deformed tooth base or excessive fit clearance, concentrating impact on tooth root.

Q：What inspection items for new side tooth delivery?
A：Check part number, casting cracks and blowholes on tip and root, test fit with tooth base and confirm pin holes are aligned.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories