253000542 bucket assembly(fo rlight material) for XCMG ZL50G/ZL50GL Wheel Loader

253000542 bucket assembly(fo rlight material) for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 253000542 bucket assembly(fo rlight material) for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Light Material Bucket, Part No.253000542, fits XCMG ZL50G, ZL50GL wheel loader. It is an enlarged high-capacity bucket assembly specially designed for low-density bulk materials.

Product Detail

Product Tags

description

This 253000542 light material bucket is fabricated by welding Q355 wear-resistant steel plates. Its bucket profile is optimized for fluffy low-density materials. Larger capacity and smooth curved inner walls ensure good material flow and clean dumping with less residue. The structure is lightweight. Stiffness is guaranteed while dead weight is reasonably controlled to avoid overload risks caused by the large bucket. Cutting edge and side plates are reinforced for wear resistance, and simple blades are optional. Smooth internal transitions reduce material adhesion. Standard welding and post-weld stress relief reduce deformation under repeated full-load cycles. Dimension inspection and weld flaw detection are carried out before delivery. It is a dedicated attachment for grain depots, power plants and biomass yards to improve handling efficiency.

product parameters

Product Name: Large-Capacity Light Material Bucket Assembly
Part No.: 253000542
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Bucket Type: Enlarged Bucket for Light Materials
Material: Q355 wear-resistant steel plate
Matching parts: Cutting edge, fixing bolts and nuts
Connection Type: Hinge lug connection
Working Condition: Grain, wood chips, fly ash, shredded straw and other low-density fluffy bulk materials
Inspection Items: Dimension inspection, weld flaw detection, assembly fit verification

Applicable Scenarios

It matches XCMG ZL50G and ZL50GL loaders, widely used in grain depots, biomass power plants, timber mills and fly ash yards. Suitable for loading, stacking and transporting wheat, corn, wood chips, shavings, furnace ash and shredded straw. It must NOT be used for high-density materials such as soil, stone and gravel, which will cause overload and damage to lift cylinders and linkages.

advantage

- Original hinge hole layout, direct replacement for standard bucket without linkage modification
- Widened and deepened bucket body for larger payload per pass and higher efficiency on light materials
- Smooth curved inner walls reduce material adhesion for cleaner dumping
- Reasonable lightweight design to fit the rated load of ZL50G / ZL50GL
- Local reinforcement on edge and side plates against abrasion from fine dusty materials
- Modular cutting edge design; only replace worn edge instead of whole bucket
- Mature industry design for light-duty attachments, stable spare parts supply

FAQ 

Q：Can this light bucket load sand or soil?
A：Not recommended. Large capacity plus high material density will easily exceed rated load and damage cylinders and linkages.

Q：Can bucket teeth be installed on this bucket?
A：Teeth are normally unnecessary for light materials. A simple cutting edge is optional if hard impurities are mixed in. Heavy rock teeth are not advised.

Q：Can I swap between light bucket and earth bucket freely?
A：Hinge dimensions are compatible for swapping. But always check material density and control load weight to avoid overload.

Q：How to reduce material sticking when handling fly ash or wood chips?
A：Keep inner wall clean and smooth. Control dumping speed to reduce compaction and adhesion.

Q：Can I keep working if side plates deform?
A：Side plates are load-bearing parts. Deformation changes stress distribution. Inspect immediately; replace or repair if deformation is serious.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories