860517415 retaining ring 100×88×3 for XCMG RP705 paver spare parts

Short Description:

U-cup seal 100×88×8.5, Part No.860517414, is a hydraulic reciprocating dynamic seal. It relies on U-shaped lip to seal by pressure contact, installed on piston or piston rod of paver cylinder to block hydraulic oil and prevent internal and external leakage.

Product Detail

Product Tags

description

This back-up ring is sized 100×88×3, made of rigid wear-resistant engineering plastic with low deformation. It is installed on the low-pressure side of main seal to fill clearance and avoid extrusion tearing of seal lip, raising the pressure resistance of seal assembly. Normally matched with U-cup and support ring of the same size for cylinder overhaul. It is widely used on paver tension cylinder, hopper cylinder and screed lifting cylinder, an essential protective part for high-pressure sealing system.

product parameters

Part No.:860517415
Product Name:Back-up Ring 100×88×3
Dimension:100×88×3
Material:Wear-resistant engineering plastic
Function:Anti-extrusion, seal protection
Working Medium:Hydraulic oil
Matching Parts:U-cup seal, support ring
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Suitable for piston and rod sealing positions of paver hydraulic cylinders, used together with U-cup to resist high pressure, prevent main seal extrusion damage and maintain stable sealing performance.

advantage

▪ Rigid material, stable under pressure and effectively prevent seal extrusion
▪ Precise dimension, perfect match with groove and U-cup
▪ Good hydraulic oil resistance and wear resistance for long service life
▪ Thin structure, will not interfere with self-energizing of main seal
▪ Standard part of cylinder overhaul kit, recommended to replace together with seals

FAQ

Q:Can I skip the back-up ring?
A:Not recommended for high pressure. Without back-up ring, U-cup lip will be extruded and torn quickly.

Q:Does back-up ring have installation direction?
A:Yes. It should be placed on the low-pressure side of U-cup, not high-pressure oil side.

Q:Can cracked or worn back-up ring continue to be used?
A:No. It loses anti-extrusion function and must be replaced.

Q:Is back-up ring the same as support ring?
A:No. Back-up ring prevents seal extrusion; support ring provides radial support and centering. They are different and often used together.

Q:Should I replace back-up ring separately?
A:Usually replaced during cylinder seal overhaul. Tiny indentation is hard to spot, reuse is risky.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us