Air conditioner outdoor unit assembly (condensing fan) 860502885 crane parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 860502885
Part name: Air conditioner outdoor unit assembly (condensing fan)
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

805046670 GB/T5782-2000 Bolt M16×130 10.9(Dacromet)
805048207 GB/T5783-2000 Bolt M16×95(Dacromet)
805048393 GB/T5786-2000 Bolt M12×1.5×35(10.9) (Dacromet)
805103888 GB/T70.1-2008 Screw M20×60
805301373 DIN6796 Washer 10 (Dacromet)
805338384 GB/T1972-2005 Disc Spring A10 (Dacromet)
819911359 Oil seal 53500008HMSA780×100×10(Meritor)
860114529 Cylinder head gasket 03-3047402 (TY320) (spare part)
860138164 175755 Piston pin circlip (engine NTA-855-C420) (spare part)
860138170 135957 Intake valve (engine NTA-855-C420) (spare part)
860138171 145701 Exhaust valve (engine NTA-855-C420) (spare part)
860138275 C3927642 Valve stem oil seal 6CTA8.3-C260-Ⅱ (spare part)
380300704 GR135.17.7 rim (8.00TG-24(SDC))
380901130 GR215Ⅹ.17.10 wheel hub
380901171 GR215C.20.3 transition plate
380903044 GR165Ⅲ rear loose (spare part)
381600436 PY180G.26-7 copper sleeve
384102082 XM101E.12-35 Bolt
384200394 RH200.12.1.2.4 small wear plate
800107308 54100014 Bearing (Meritor)
800141662 3040386 Fan belt
800309251 XM50.09.1.8 tire
800511439 GB/T288-1994 Bearing 23222 CK/W33
800933816 GY224.001 High temperature ventilation pipe assembly
801103795 53000055 Oil seal 160×190×15(Meritor)
803010930 XG91-29A-00 steering cylinder
803011217 SCL650 flapper valve
803190752 I10LG3/8ED Straight Connector
803191229 I22LM30×1.5ED straight connector
803192034 GE10L3/4UNFOMDCF connector
803202762 Pressure gauge 213.53.063/40MbarG1/4RUE
803500239 EC8182 Oil pressure sensor

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service