Condenser fan 860519156 truck crane spare parts

Condenser fan 860519156 truck crane spare parts Featured Image
  • Condenser fan 860519156 truck crane spare parts
  • Condenser fan 860519156 truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.


Product Detail

Product Tags

description

Part No: 860519156
Part name: Condenser fan
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

805604500 PY180G.17-18 Tilt cylinder pin
805801033 GB/T3287-2011 Tee B1-1-Zn-B
805801034 GB/T3287-2011 Elbow A1-1-Zn-B
805801441 JB3616.1-1984 Double steel wire hoop 60-65
275101678 FRONT DIFFERENTIAL
YJ315X TORQUE CONVERTER
252101813 TOOTH
252101812 SIDE TOOTH
252101811 SIDE TOOTH
805002221 BOLT SET
5001393 BRAKE PUMP
803004037 AIR VALVE
4B4-22-LINER LINER SET
D30-9000200 LINER SET YC4D80-T20
530-1004019 CONNECTING ROD BEARING SET
D30-1005054 MAIN BEARING SET
D30-1011000A OIL PUMP
330-1112030 FUEL INJECTOR NOZZLE
860141912 BRAKE DISC
400404694 PIN GROUP ARTICULATING
400404679 UPPER HITCH GROUP
2W8002 WATER PUMP
490B-01004 CYLINDER HEAD GASKET
490B-KIT JUNTAS GASKET KIT 490BPG
13021190 FAN
BHP6P110 FUEL INJECTION PUMP
ZL10,1 REAR DIFFERENTIAL
ZL10,2 FRONT DIFFERENTIAL
252115313 SHAFT
13035627 PRIMARY / SECONDARY AIR FILTER
612600114993 PRIMARY / SECONDARY AIR FILTER
WS50-040038/39 PRIMARY / SECONDARY AIR FILTER
250100280 COUPLING
6QAJ-1307010D WATER PUMP
330-1003013B* CYLINDER HEAD BOLTS SET
275100237 BRAKE DISC
800305568 OIL COOLER
803043375 HYDRAULIC PUMP
803172727 HYDRAULIC FILTER
803184486 HYDRAULIC FILTER
802103356 FRONT WINDSHIELD
802103357 FRONT WINDSHIELD
L4R040301A CRANKSHAFT YT4A2-25
L4R040301B CRANKSHAFT 4105G72
803009341 HYDRAULIC PUMP

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

Our warehouse

Our warehouse

Pack and ship

Pack and ship
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories