conveyor belt for XCMG RP705 paver spare parts

product parameters

- Part Name: Conveyor Belt
- Compatible Model: XCMG RP705 medium crawler paver
- Construction: Multi‑layer fabric carcass with heat‑resistant wear‑resistant rubber
- Process: Hot vulcanization, edge sealing reinforcement
- Performance: Heat resistance, tear resistance, abrasion resistance, cyclic tension resistance
- Configuration: Separate left and right belts
- Function: Transport asphalt mixture and feed the distributing auger
- Usage: OEM replacement conveyor belt

Applicable Scenarios

Suitable for maintenance, overhaul and refurbishment of XCMG RP705 crawler paver; replacement when the original belt is worn, delaminated, torn or permanently misaligned; asphalt base and surface paving for municipal roads and highways; wearing feeding part stocked by construction machinery parts suppliers.

- Accurate original dimension: Perimeter, width and holes match the original for direct fitting without cutting.
- Heat and wear resistant: Special rubber cover withstands hot asphalt and extends service life under aggregate abrasion.
- Tear‑resistant structure: Multi‑layer high‑strength fabric core provides high tensile strength against breakage under heavy load.
- Reinforced sealed edges: Reduce fraying and cracking caused by aggregate biting and slow water induced delamination.
- Stable low‑deviation running: High forming precision ensures good roller contact, uniform flow and less material segregation.
- Convenient maintenance: Single side belt can be replaced independently to cut repair expense.

FAQ 

Q: Can this conveyor belt fit other paver models?
A: It is designed for XCMG RP705. Roller spacing, width and circumference vary greatly among models. Cross‑model swap is not recommended without on‑site measurement and drawing confirmation.

Q: Does the package include drive rollers and idlers?
A: Only the belt itself is supplied. Rollers, idlers and fasteners are excluded. Serviceable original rollers and joints can be reused.

Q: Is replacement mandatory for a small local cut?
A: Tiny cuts outside main tension zones can be patched temporarily. If cracks extend crosswise, the fabric core is exposed, or large blisters and delamination appear, replace it to avoid unexpected breakdown.

Q: Why does the new belt deviate after installation?
A: Check whether tension on both sides is balanced, whether rollers are coated with built‑up material and whether the frame is distorted. Adjust the tension gradually to keep the belt centered.

Q: How to extend belt service life through daily care?
A: Clean adhered asphalt after each shift to avoid rubber corrosion by caking material. Keep hard metal debris out of the feeding path. Check tension regularly to prevent slipping from over‑slack or accelerated fatigue from over‑tightening.