Generator 803537534 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 803537534
Part name: Generator
Part brand: XCMG
Compatible equipment model: 25t truck crane and other xcmg truck cranes

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

612600013358 THRUST BEARING
81500010046 MAIN BEARING
612600061739 WATER PUMP
85513028 COOPER SLEEVE
83513202 HUB
13065822 RING KIT
803004137 HYDRAULIC PUMP
5002029 HYDRAULIC PUMP
803000458 STEERING PUMP
JC-A-4050 SEALS KIT
B7600-9000100A GASKET KIT
380900930 RIM ASSY
ZL10-10 DIFFERENTIAL CORE
YDL-1JQ000 LINER SET
13035627 AIR FILTER SET
M3020-1109101/2 AIR FILTER SET
B8700-1111905 COUPLING PLATE
250100280 PUMP COUPLIG
XGSX01-64 WATER RADIATOR
77500938B RING GEAR
400200700 PIN
2027817 FRONT SEAL
2027829 REAR SEAL
2027799/800 THRUST BEARING
2027797/98 MAIN BEARING
2030695 CONNECTING ROD BEARING
2190721 WATER PUMP
2027828 OIL PRESSURE SENSOR
800347517 RIM ASSY
401002015 AXLE SHAFT
800351011 CHAIN
800351010 CHAIN
803010615 HYDRAULIC PUMP
803076110 WOKR VALVE PILOT HANDLE

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service