Jib assembly assembly 114004741 XCMG truck crane spare parts

Jib assembly assembly 114004741 XCMG truck crane spare parts Featured Image
  • Jib assembly assembly 114004741 XCMG truck crane spare parts
  • Jib assembly assembly 114004741 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.


Product Detail

Product Tags

description

Part No: 114004741
Part name: Jib assembly assembly
Part brand: XCMG
Compatible equipment model: 25t truck crane and other xcmg truck cranes

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

805000106 BOLT
819906012 SUPPORT, TOOTH AND PIN KIT
819906011 SIDE SUPPORT,TOOTH & PIN KIT
252101235 BLADE
805000379 BOLT
252101727 CUTTING EDGE
805000113 BOLT
252904937 TOOTH
819908881 SIDE CUTTER
819908880 SIDE CUTTER
380901118 RIPPER TOOTH
805601794 ELASTIC ROUND PIN
C490BPG ENGINE ASSY
860117405 SPIDER
860118416 SPIDER
252600341 PIN
JC-A-4050-09 PISTON BRAKE
82214204 PINION AND RIM GEAR SET-FRONT
310600283 BUCKET PIN
310600285 BUCKET PIN
380900930 RIM ASSY
340-9000200B-H LINER SET
330-1004022 CONNECTING ROD BEARING
6105Q-1005054 MAIN BEARING
612600081335 FUEL FILTER
1000447498 FUEL FILTER
13055724 OIL FILTER
C27150/CF1810 AIR FILTER SET
AA90145 AIR FILTER SET
1000424655 OIL FILTER
75600118 WHEEL BOLT M20
GB/T6171-2000 NUT M20
800357360 Hydraulic transmission filter
SG014300-5090 Cabin filter
803079928 filter
23.5-25 tyre and tube complete
275301312 carrier assy rear

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

Our warehouse

Our warehouse

Pack and ship

Pack and ship
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories