Professional China Sany Concrete Pump Parts - one-piece piston for concrete pump spare parts – CCMIC

one-piece piston

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

Packing  

Carton Boxes, or according to clients’ request.

description

The piston of the pump truck is in direct contact with concrete, it is required to be sealed and wear-resistant. When we find that the water in the tank is muddy or there is concrete, we should realize whether the piston is seriously worn, and we need to check the piston. If the piston is worn, it needs to be replaced in time to avoid straining the concrete cylinder.

When the coating (0.2-0.25mm) of the conveying cylinder is not worn, and concrete mud or sand appears on the back of the concrete piston, that is, the back of the water tank, it indicates that the piston is worn. The concrete seal, guide ring, and dust ring should be replaced immediately.

Since the piston can be returned to the water tank of the pumping system through a simple operation on the control panel, the piston should be removed frequently for inspection. In addition, after the piston is returned to the water tank, the concrete seal and guide ring on the piston should be cleaned and lubricated with lithium-based grease, which can effectively extend the service life of the piston.

Post-maintenance of the concrete piston of the concrete pump accessories

After replacing the new concrete piston, post-maintenance must be carried out

1. Frequently withdraw the piston of the concrete pump fittings, clean and apply lubricating oil;

2. It is found that there is mortar in the washing room, and the concrete piston of the concrete pump accessories should be replaced immediately;

3. Replace the cooling water frequently, clean the washing room and keep it clean;

4. Add enough cooling water, and add hydraulic oil for concrete pump parts as needed to improve lubrication.

our warehouse

Pack and ship

• Aerial Boom Lift
• China Dump Truck
• Cold Recycler
• Cone Crusher Liner
• Container Side Lifter
• Dadi Bulldozer Part
• Forklift Sweeper Attachment
• Hbxg Bulldozer Parts
• Howo Engine Parts
• Hyundai Excavator Hydraulic Pump
• Komatsu Bulldozer Parts
• Komatsu Excavator Gear Shaft
• Komatsu Pc300-7 Excavator Hydraulic Pump
• Liugong Bulldozer Parts
• Sany Concrete Pump Spare Parts
• Sany Excavator Spare Parts
• Shacman Engine Parts
• Shantui Bulldozer Clutch Shaft
• Shantui Bulldozer Connecting Shaft Pin
• Shantui Bulldozer Control Flexible Shaft
• Shantui Bulldozer Flexible Shaft
• Shantui Bulldozer Lifting Cylinder Repair Kit
• Shantui Bulldozer Parts
• Shantui Bulldozer Reel Shaft
• Shantui Bulldozer Reverse Gear Shaft
• Shantui Bulldozer Spare Parts
• Shantui Bulldozer Winch Drive Shaft
• Shantui Dozer Bolt
• Shantui Dozer Front Idler
• Shantui Dozer Tilt Cylinder Repair Kit
• Shantui Sd16 Bevel Gear
• Shantui Sd16 Brake Lining
• Shantui Sd16 Door Assembly
• Shantui Sd16 O-Ring
• Shantui Sd16 Track Roller
• Shantui Sd22 Bearing Sleeve
• Shantui Sd22 Friction Disc
• Shantui Sd32 Track Roller
• Sinotruk Engine Parts
• Tow Truck
• Xcmg Bulldozer Parts
• Xcmg Bulldozer Spare Parts
• Xcmg Hydraulic Lock
• Xcmg Transmission
• Yuchai Engine Parts