Rear window glass 860505780 truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 860505780
Part name: Rear window glass
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

490B-21000 PRIMARY FUEL PUMP
H50-1-2 SEAL VALVE
490B-04100 PISTON RING KIT
9306446 HYDRAULIC FILTER
9309192 HYDRAULIC FILTER
6105QA-1007018 VALVE GUIDE
389515300/600 AIR FILTER SET
75700440 BRAKE PISTON
JC-A-4050-06 BRAKE PAD
D490BPG-05004 CRANKSHAFT C490BPG
612600110540 AIR FILTER SET
AF25270 + AF25271 AIR FILTER SET
WS50-041500 OIL COOLER
G11473 POWER TAKE OFF
BDN05N TRANSMISSION ASSY
YJ280-4U TORQUE CONVERTER
D7103-1307100B WATER PUMP
LT,710300D AIR COMPRESSOR
9352315 FNR CABLE AND LEVER
LW166-6-2 BRAKE PAD – SQUARE
C490BG ENGINE ASSY
803588207 AIR CONDITIONER FILTER
803164329 HYDRAULIC FILTER
800302360 WHEEL ASSY
WB127115 SLEWING RING BEARING ASSY
WB159900 REDUCER PINION
252600341 bucket shaft pin
251900441 O ring
803164079 seal ring
252600343 steel bushing

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service