Right side panel 134901197 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 134901197
Part name: Right side panel
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

380903063 GR215Ⅹ.17.7-1A connecting ring
381601139 PY180G.10.2-1/-3 Side Blade (Homemade)
800302490 SPC4500 V-belt
800936586 ABT4-01 lock female positive tee terminal
803010427 D72X000A Water Pump
803010466 0201RK010BN3HC filter element
803543266 1E3996160-671 Headlight (left)
803543267 1E3996160-681 Headlight (right)
803612164 XB2-BJ53 selector switch
805604861 GR215Ⅹ.10.1-3 pin
276400697 LQC160C.2.2-2 large feeding claw
276601750 XAP320.02.5.4.1.4 Cassette Dial Claw
276800185 XAP240.19.1.2.3-2 clip
381200279 GR260.10.2-3A blade
390200444 XLZ250.12-10 Rubber bushing
393100389 WB21K.17.21 Push-pull flexible shaft
396102026 XCMG-3 Nozzle
800106604 C3289648 Multi-Wedge Belt
800515287 Curved rod ball joint rod end bearing SQ6-RS
800901444 JSM-3T-Z10 Lock Female Tee End Fitting G3/8”
800903202 K23JD-R series two-position three-way electric control globe valve K23JD-L15-R
805001904 GB/T5782-2000 Bolt M20×65
805006412 GB/T5783-2000 Bolt M12×30 10.9(Dacromet)
805100024 GB/T70.1-2008 Screw M16×120
805238331 75501993 Flange nut Meritor
819910780 YXC150 0～1.6MPa electric contact pressure gauge
380900933 GR215Ⅹ.17-4 end cap
380901128 GR215Ⅹ.17.9 oil cylinder seat
381600222 PY180-G1 Front axle steering cylinder
800141688 C3944158 main bearing
800308427 Belt Roller 10GH2103A
800309567 PL800.CZG89.00 bearing roller sub-height
803190731 LH12L Right Angle Combination Joint
803544465 38136102620 Tachometer Hour Meter (125 Teeth)
803645769 LA39-11RD/R.G31 Double button
805009743 Bolt 7/16-14UNC×35(10.9)
805238935 GB/T6170-2000 Nut M12 (Dacromet)
805805708 HG/T20610-2009 Graphite spiral wound gasket with inner ring DN100-D type
819906723 BHR204-89-750 Lower parallel idler
276803225 XAP240.19.1.2.3-2A Clip
380900253 GR215Ⅹ.13.1-1/-4 fork assembly
380902474 GR215DⅡ.14.2.1-6 Round steel φ20×110
396100761 LK-D Rubber Asphalt Nozzle
800105978 A17-420 Belt
800107868 3973232/FF5580 diesel filter element

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service