Left rear window glass 860505775 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 860505775
Part name: Left rear window glass
Compatible equipment model: xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

800106635 80513004 Half shaft
803190339 XZDNA8-010 Pipe clamp
803612149 SD2-PA24 cross switch
803645770 XB2-BD21C Knob
805000560 GB/T5782-2000 Bolt M24×70(10.9)
805004673 GB/T5783-2000 Bolt M18×60 10.9
805105335 Hexagon socket head cap screw 7/16-14UNC-2A×35(10.9)
805338267 GB/T96.1-2002 Gasket 10 (Dacromet)
805600061 GB/T91-2000 Pin 6.3×60
840344114 Reverse 45° offset knife
276100283 LQC80B.1-9 Small sprocket
380900920 GR215Ⅹ.14-1 gland
380900985 GR215A.01.2 exhaust pipe
800105928 Air filter AH19227
800107351 85513027 Bearing seat (Meritor)
800107396 C3922686 Upper compression ring
800107397 C3919918 Middle compression ring
800107398 C3921919 Oil ring
800141685 C3934046 Piston pin
800152132 3008591 Intake and exhaust pipe gasket
800307732 Roller 10T0191AY2
800308439 50140003 Screw (Meritor)
800515239 GB/T5801-1994 Needle Roller Bearing NK45/20
800901463 360501 07 Metal and Nylon Pipe Sleeve 12
801702941 Shock absorber E-220
803068978 QC14/20-WP12 Power Oil Pump
803192242 GB/T9877.1-1988 Oil seal PD200×240×18
803538051 Tachometer Hour Meter (Dongfeng)
803600094 I15L3/4UNFO oil return connector
805000258 GB/T5782-2000 Bolt M24×90 10.9
805005961 GB/T5783-2000 Bolt M16×65(10.9) (replaced by 805002038
805006286 GB/T5783-2000 Bolt M20×55 10.9(Dacromet)
805006287 GB/T5783-2000 Bolt M12×40 10.9(Dacromet)
805010069 Bolt 3/4-16UNFL=50
805203661 GB/T6184-2000 Nut M12 10
805338291 GB/T97.1-2002 Gasket 24 (Dacromet)
822537547 1888 Automatic Transmission Fluid
380300650 GR135.12-2 upper liner
380300729 GR135.06.2-1 paper pad
380900338 GR215A.09-1 connecting plate

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service