Right side panel 134901197 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 134901197
Part name: Right side panel
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

819911389 Export wooden box 2000×1500×1500
276403464 LQC160C.2.2.2-4 Angle steel seat
380500451 GR165D.20-5 connecting plate
380600222 GR180D.19-1 support plate
380600512 GR180Ⅲ.01-12 Rear support Ⅰ
380600515 GR180Ⅲ.01-15 Rear support Ⅱ
380600517 GR180Ⅲ.01-17 rod
380600523 GR180Ⅲ.01-3 take over
380600546 GR180D.02.1 hood
380600547 GR180D.20.1 transition plate
380601342 A set of GR180DⅤ accessory products
380602221 GR180D.14.2-8 Rubber sleeve
380900867 GR215.03.1 mounting plate
380900874 GR215.01-10 pad
380900875 GR215.01-11 Muffler bracket Ⅰ
380900877 GR215.01.13-1 take over
380900897 GR215.01.16A Muffler bracket Ⅱ
380901137 GR215Ⅺ.01-1 Pad
380903074 GR215Ⅹ.17.4A right steering knuckle
380904727 GR215Ⅹ.17.7.3B Connector
381300938 GR300Ⅱ.10.1-10A Baffle Ⅱ
381400103 PY160-G3 Blade Out Cylinder
381600220 PY180G.26-8 Pin (Ⅱ)
800141037 F098-B-010 Oil-water separator
800515233 GB/T7810-1995 with vertical seat outer spherical ball bearing UCP210
800903370 SEH14 air compressor
802103802 A0-B23387 Left door glass
803010404 GM5-1600 Rotor Motor
803010405 90K075 Rotor Motor
803011204 DL83-E15L-I/YY directional valve
803190580 PC12-03 Straight terminal fitting (male thread)
803506982 DLP22-2B Ammeter
803700045 TP28X Relay Holder M22×1.5
803742571 880160 Smart Power Relay
805000076 GB/T5782-2000 Bolt M10×70
805000215 GB/T5782-2000 Bolt M12×140

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service