Right rear combination lamp 803599545 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 803599545
Part name: Right rear combination lamp
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

860138172 127930.200354 valve seat ring (engine NTA-855-C420) (spare part)
860138173 3006456 Valve guide (engine NTA-855-C420) (spare part)
380300642 GR135.01-6 Pinch pipe
380500444 GR165D.18-1 cover plate
380500615 GR165DⅡ.14.2-4 rubber sleeve
380500617 GR165DⅡ.14.2-6 rubber sleeve
380500679 GR165DⅡ.18-3 pipe clamp
380501044 GR165DIX.14.1.3 Left front light bracket
380501046 GR165DIX.14.1.4 Right front light bracket
380600544 GR180D.01-2 elbow
380601350 GR180D.18-1 support frame
380700269 GR185.20-2 paper pad
380900336 GR215Ⅻ.20.1 support plate
380900915 GR215Ⅹ.14-11 felt ring
380900921 GR215Ⅹ.14-2 felt ring
380900987 GR215A.01-4 Pipe clamp
380901073 GR215Ⅹ.02.3 right support
380901074 GR215Ⅹ.02.4 left support
380901084 GR215Ⅹ.06.2-1 oil suction transition block
380901108 GR215Ⅹ.14.2-6 rubber sleeve
380901167 GR215C.18-2 Rubber pad
380905146 GR215C.14-5 Lower hinge shaft
380905147 GR215C.14-9 Nut
380905148 GR215C.14-7 Cover
380905149 GR215C.14-8 Bushing
381600227 PY180-G4 Left Articulated Steering Cylinder
800106643 D11-101-11+A starter motor
800903124 Intake connecting pipe IC9288(L=180)
800937327 4M310-10-AC220V Solenoid valve for butterfly valve
803010866 XH.G135X.W muffler assembly
803190298 Diesel-water separation filter element
803190394 TLPG16-430 Pipe clamp
803506992 TY50PD fan heater assembly
803545407 XGKT460-P01 Air conditioner assembly
803704332 VFD022M43B Inverter
805105461 GB/T70.1-2008 screw M20×1.5×45
805203863 GB/T6173-2000 Nut M24×1.5
805338265 GB/T96.1-2002 Gasket 8 (Dacromet)
805338390 GB/T97.1-2002 Gasket 30 (Dacromet)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service