200635849 pressure plate for XCMG RP705 paver spare parts

product parameters

- Part Number: 200635849
- Name: Press Plate
- Applicable Model: RP705 medium crawler paver
- Material: Wear-resistant structural steel plate
- Process: CNC cutting, surface finishing, stress relief, anti-corrosion coating
- Matching Parts: Fastening bolts, wear liner, locating pin
- Function: Clamping and limiting, fixing liner, blocking debris, reducing noise

Applicable Scenarios

The liner plates are installed on the left and right flaps of the RP705 paver and are widely used for asphalt paving of municipal roads, highways, industrial parks, and airport runways.

- The sheet material has sufficient rigidity and is produced using a stress-relief process, making it resistant to deformation and warping under long-term vibration and impact.
- The contact surface is smooth and uniform, and will not cut or crack the wear-resistant liner when compressed.
- Original factory hole positions are precise, eliminating the need for hole enlargement, grinding, or modification during assembly.
- The protective coating has strong adhesion, is resistant to asphalt and mud erosion, and has a longer service life.
- The clamping and limiting mechanism ensures stability, reduces liner movement, and minimizes wear on the pin and ear plate.
- Original dimensions, directly replaces the old pressure plate, high compatibility during disassembly and assembly.

FAQ

Q: Can a pressure plate that is slightly bent or deformed still be used?
A: Minor deformation can be corrected and tested; if the pressing surface cannot adhere tightly to the liner or the pressing force is insufficient, it is recommended to replace it directly.

Q: If this pressure plate is replaced, is it necessary to replace the liner plate at the same time?
A: If the liner is only slightly worn and has no cracks or chipping, it can continue to be used; if the liner becomes thinner or has gaps, it is recommended to replace it to ensure proper fit.

Q: What causes the pressure plate fixing bolts to loosen frequently?
A: This is mostly due to the increased gap caused by wear of the liner, which intensifies the impact load. Check the liner thickness, tighten it to the specified torque, and add anti-loosening measures if necessary.

Q: The paint on the pressure plate is peeling off and rusting. Will it fail soon?
A: The surface rust can be cleaned and the plate can be used for a short period of time; however, if pitting occurs, the plate becomes thinner, or its strength decreases, it should be replaced in time.

Q: What should I do if the liner still moves from side to side after the new pressure plate is installed?
A: Check the installation direction of the pressure plate and confirm that all bolts are tightened; if the pressure plate itself is worn thin and the clamping stroke is insufficient, replace the pressure plate.