201003322 protective plate for XCMG RP705 paver spare parts

201003322 protective plate for XCMG RP705 paver spare parts Featured Image
  • 201003322 protective plate for XCMG RP705 paver spare parts

Short Description:

200638879, Right Rear Guard, suitable for XCMG RP705 medium crawler paver. It is a protective plate mounted at the right rear side of the feeding assembly.

Product Detail

Product Tags

description

This genuine guard plate is fabricated by cutting and bending carbon steel plate, with precisely positioned mounting holes and a profile conforming to the bearing seat and sprocket. Anti‑rust paint treatment delivers good impact resistance. While the paver works continuously, flying aggregate thrown by the circulating chain is blocked by this guard, protecting bearing housings, seals and sprocket teeth from direct impact, reducing asphalt buildup and slowing seal wear. Torn, heavily deformed, elongated holes or severe corrosion expose rotating internals, allowing sand to enter bearings and damage seals, resulting in oil leakage and abnormal noise. Replace the guard if it is badly damaged during overhaul.

product parameters

- Part No.: 201003322
- Name: Guard Plate
- Applicable Model: XCMG RP705 medium crawler paver
- Material: Carbon structural steel plate
- Process: CNC cutting, bending, drilling, deburring, derusting, anti‑corrosion painting
- Matching parts: Fixing bolts, flat washers
- Function: Protect feeding drive bearing seat and sprocket, block aggregate impact, isolate moving parts and prevent grit from entering seals

Applicable Scenarios

Outer protection for paver feeding drive bearing seat; replacement for deformed, torn or rusted old guards; outer shielding for feeding sprockets; renewal during feeding assembly maintenance; pre‑assembly on new feeding drive sections.

advantage

- Original profile fits the machine perfectly with accurate mounting holes for easy installation
- Sturdy steel plate withstands gravel impact and protects costly internal bearings and seals
- Anti‑corrosion coating resists hot asphalt and muddy water to slow rusting
- Well‑planned cutouts avoid interference with sprockets and chains
- Separate individual guard for independent replacement and lower maintenance cost

FAQ

Q: Can a slightly dented guard be straightened and reused?
A: It may be reused after cleaning if there are no cracks and stretched holes. If torn or with cracked welds, replacement is recommended.

Q: Is there a required mounting direction?
A: Yes. The folded rim faces the chain and flying material. Rotate the chain after installation to check for rubbing.

Q: How to remove caked asphalt on the guard?
A: Scrape residue gently after shutdown and cooling. Avoid heavy hammering to prevent deformation and paint peeling.

Q: Can guards for left and right drives be swapped?
A: Interchange is allowed only for symmetric profiles. Match the contour before fitting to avoid chain interference.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories