252101727 cutting edge for XCMG ZL50G/ZL50GL Wheel Loader

252101727 cutting edge for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 252101727 cutting edge for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Side Cutting Plate, Part No.252101727, fits XCMG ZL50G, ZL50GL wheel loader. It is the side cutting plate installed on both side edges of the bucket as a side wear protector.

Product Detail

Product Tags

description

This 252101727 side cutting plate is rolled from high manganese wear-resistant alloy steel with quenching heat treatment. The surface is hard while the substrate keeps proper toughness for wear and moderate impact resistance. Precisely positioned bolt holes match the bucket side base for easy installation. The beveled profile guides material inward and reduces stone jamming between bucket gaps, preventing side plate tearing. Every batch passes hardness and visual flaw inspection to eliminate cracks and material defects. As a replaceable side wear part, it avoids replacing the whole bucket side plate and cuts maintenance cost. It fits standard and reinforced earth buckets for earth and gravel mixtures.

product parameters

Product Name: Bucket Side Cutting Plate
Part No.: 252101727
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Material: High manganese wear-resistant alloy steel
Process: Rolled, edge quenching
Matching parts: Bolts, nuts, spring washers
Installation: Bolt-on type
Working Condition: Earth excavation, sand, gravel and bulk material transfer
Inspection Items: Dimension check, hardness test, non-destructive sampling inspection

Applicable Scenarios

It is matched with standard and reinforced earth buckets for ZL50G / ZL50GL, widely used on construction sites, aggregate yards and road foundation projects for soil and gravel mixtures. Long-term heavy rock quarrying is not recommended, as repeated impact of large rocks may break the plate.

advantage

- Original hole layout with accurate bolt spacing, direct fit without cutting modification
- Quenched high manganese steel, excellent wear resistance to protect bucket side plates
- Bevel guiding profile reduces stone jamming and protects side welds
- Independent modular part, only replace the plate instead of the whole bucket side structure
- Balanced toughness, resistant to brittle fracture under normal gravel impact
- Quick disassembly and replacement to reduce machine downtime
- Compatible with matching edge and tooth sets of this model, easy for stock management

FAQ 

Q：Can a worn thin cutting plate keep working?
A：Minor wear is acceptable temporarily. If it becomes too thin or chipped, protection fails and the bucket side plate will wear rapidly. Replace in time.

Q：Can this side cutting plate be installed on rock bucket?
A：This is earth-type plate with limited impact resistance. It tends to break under continuous heavy rock impact. Use thick rock side plate for rock work.

Q：How to maintain the mounting bolts?
A：Tighten diagonally with spring washers, retorque before each shift to prevent loosening from vibration.

Q：What is the relation between side cutting plate and side tooth?
A：The plate is on the outer side of bucket plate while the tooth is forward. They work together for material diversion and protection. Damage to one increases load on the other.

Q：Can bent cutting plate be straightened and reused?
A：Reuse after straightening is not recommended. Internal stress changes and cracks may form easily under impact. Replacement is preferred.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories