252101791 bucket for XCMG ZL50G/ZL50GL Wheel Loader

252101791 bucket for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 252101791 bucket for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Bucket, Part No.252101791, fits XCMG ZL50G, ZL50GL wheel loader. It is an original standard earthmoving bucket assembly, including bucket body, main cutting edge, side plates, tooth bases and high-strength hinge lugs, matched with standard earth bucket teeth.

Product Detail

Product Tags

description

This 252101791 standard earth bucket is fabricated from Q355 wear-resistant steel. The bucket root, bottom plate and cutting edge are thickened and reinforced for better impact and abrasion resistance. The classic curved profile provides moderate penetration resistance, high fill factor and smooth dumping with less material sticking. Tooth bases are fully welded and ultrasonically inspected to prevent falling off under repeated impact. Cutting edge, side plates and bucket teeth are modular wear parts for separate replacement. Post-weld stress relief reduces fatigue cracking. Dimension and lug concentricity are inspected before delivery for easy swap. It is suitable for earth, gravel and construction waste, and is the most widely used standard bucket for ZL50G / ZL50GL.

product parameters

Product Name: Standard Earthmoving Bucket Assembly
Part No.: 252101791
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Bucket Type: Standard Earth Bucket
Material: Q355 wear-resistant steel plate
Matching parts: Main cutting edge, side plates, center teeth, side teeth, bolt sets
Connection Type: Hinge lug connection
Working Condition: Earth excavation, aggregate loading, construction waste transfer
Inspection Items: Dimension inspection, ultrasonic weld test, lug concentricity check

Applicable Scenarios

It fits XCMG ZL50G and ZL50GL loaders, widely used in construction sites, aggregate yards and road foundation works for soil and gravel mixtures. It can handle materials mixed with small crushed stones, but continuous heavy quarrying and prying large boulders are not recommended. Use dedicated rock bucket for rock work.

advantage

- Original standard hinge dimensions, perfect fit for original linkage and pins, no cutting during swap
- Reinforced bucket root and bottom plate, longer service life than thin low-grade buckets
- Curved bucket profile for low digging resistance, clean dumping and less adhesion
- Modular wear parts, edge and teeth can be replaced individually to save cost
- Fully welded and inspected tooth bases for stable impact resistance
- Stress relief welding reduces fatigue cracks under cyclic loading
- Standard OEM bucket, mature spare parts supply and easy stocking

FAQ 

Q：What is the difference between standard bucket and reinforced earth bucket?
A：This is standard version for regular soil and sand. Reinforced bucket uses thicker plates and extra reinforcement for higher crushed stone content.

Q：Can rock bucket teeth be installed?
A：Mounting holes are compatible, but the bucket structure is designed for earth. Continuous heavy rock loading may damage the bucket body.

Q：Can I keep working with small cracks on bottom plate?
A：Bottom plate is the main load-bearing part. Cracks spread under impact. Minor cracks can be welded after inspection; replace if cracks are long.

Q：How to prevent loose bolts?
A：Tighten bolts diagonally with spring washers, retorque before each shift to avoid loosening from vibration.

Q：Can this bucket swap with light material bucket?
A：Hinge holes are compatible. But light bucket has larger capacity and will cause overload when loading dense soil and stone.

Q：What to check on new bucket arrival?
A：Verify part number, deformation on lugs and bucket body, welds on bucket root and tooth bases, hinge hole concentricity and mounting holes alignment.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories