253000543 bucket assembly(for light material) for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Product Name: 4.0m³ Light Material Bucket Assembly
Part No.: 253000543
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Rated Capacity: 4.0m³
Material: Q355 wear-resistant steel plate
Matching parts: Cutting edge, bolts, nuts, spring washers
Connection Type: Hinge lug connection
Working Condition: Wheat, corn, wood chips, shavings, fly ash, shredded straw and other low-density fluffy bulk materials
Inspection Items: Dimension inspection, weld flaw detection, hinge lug concentricity test

Applicable Scenarios

It is suitable for XCMG ZL50G and ZL50GL loaders, mainly deployed in grain depots, biomass power plants, wood processing factories and fly ash yards for stacking and loading light loose materials. Only low-density materials are allowed. Loading soil, gravel or rock will cause severe overload and lead to deformation or fracture of lift cylinders, linkages and frame.

- Standard OEM hinge layout, direct swap with standard earth bucket without cutting or modifying linkage pins
- Large 4.0m³ capacity increases payload per pass and greatly improves loading efficiency for light materials
- Smooth curved inner surface minimizes material sticking for complete dumping and less cleaning work
- Well-controlled lightweight structure matches machine rated load with high safety margin
- Reinforced edge and side plates resist abrasion from fine dust and granular debris
- Modular cutting edge, replace only worn edge instead of the whole bucket to cut maintenance expense
- Proven light-duty attachment design with widely available spare parts for easy stock management

FAQ 

Q：Can this 4.0m³ light bucket load sand or muck?
A：Not recommended. High density of sand will easily exceed the rated load and damage cylinders and linkages.

Q：Can bucket teeth be fitted on this bucket?
A：Teeth are unnecessary for normal light materials. A simple cutting edge is optional for mixed hard impurities.
Heavy rock teeth are not recommended.

Q：Can I switch between light bucket and earth bucket freely?
A：Hinge dimensions are compatible. Always check material density and control load weight to avoid overload.

Q：How to reduce sticking of fly ash and wood chips?
A：Keep inner walls smooth and clean, and slow down dumping movement to reduce compaction and adhesion.

Q：Can the bucket keep working if side plates deform?
A：Side plates are load-bearing parts. Deformation changes stress distribution. Inspect immediately; repair or replace if deformed seriously.