252101793 bucket for XCMG ZL50G/ZL50GL Wheel Loader

252101793 bucket for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 252101793 bucket for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Bucket, Part No.252101793, fits XCMG ZL50G, ZL50GL wheel loader. It is a heavy-duty reinforced rock bucket assembly, consisting of thickened bucket body, main cutting edge, side plates, heavy-duty tooth bases and thick hinge lugs, matched with rock-type bucket teeth.

Product Detail

Product Tags

description

This 252101793 heavy-duty bucket is fabricated from NM400 wear-resistant steel. The bucket root, bottom plate, lugs and tooth bases are double-reinforced for superior impact and tear resistance. The short rock-type profile delivers strong penetration and reduces stone jamming. Tooth bases are fully welded and ultrasonically inspected to resist repeated rock impact. Cutting edge, side plates and teeth are heavy-duty rock wear parts with modular design for individual replacement. Post-weld stress relief prevents fatigue cracks under cyclic shock loads. Dimension and concentricity inspection are performed before delivery for reliable interchangeability in quarrying, crushed stone handling and hard rock excavation.

product parameters

Product Name: Heavy-Duty Reinforced Rock Bucket Assembly
Part No.: 252101793
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Material: NM400 wear-resistant steel plate
Matching parts: Rock cutting edge, side cutting plates, rock center teeth, rock side teeth, high-strength bolt sets
Connection Type: Hinge lug connection
Working Condition: Ore quarrying, crushed stone transfer, hard soil and heavy construction waste
Inspection Items: Dimension inspection, ultrasonic weld test, hinge lug concentricity check

Applicable Scenarios

It is suitable for XCMG ZL50G and ZL50GL loaders, mainly deployed in quarries, stone processing plants and hard foundation excavation sites for ore, boulders and compacted hard soil. It is not recommended for grain, wood chips or fly ash; its heavy dead weight reduces efficiency for light bulk materials.

advantage

- Standard OEM hinge dimensions, perfect fit for original linkage pins, no cutting modification during swap
- Thick NM400 plate with double reinforcement for excellent impact and tear resistance and longer service life
- Short rock bucket profile for powerful penetration and less stone jamming
- Fully welded and inspected tooth bases to withstand continuous rock impact
- Modular rock wear parts; replace edge and teeth separately to cut maintenance cost
- Stress-relieved welds with strong anti-fatigue performance under frequent heavy shock
- Mature rock attachment spare parts system, ready stock for rock teeth and edges

FAQ 

Q：Can this rock bucket be used for fly ash or wood chips?
A：Not recommended. The bucket itself is heavy, which leads to high fuel consumption and low efficiency. Use dedicated light bucket instead.

Q：Can I keep working with small cracks on the bucket bottom?
A：Bottom plate is the main load-bearing part. Rock impact will extend cracks. Minor cracks can be welded after inspection; replace if cracks are long.

Q：Can rock bucket and standard earth bucket be swapped?
A：Hinge holes are compatible. Always match bucket type with working material. Earth bucket will fail quickly under rock load.

Q：What causes frequent rock tooth breakage?
A：Common causes include prying boulders, side rock impact, deformed tooth base or cracked welds, concentrating impact stress on tooth root.

Q：How to prevent loose bolts for edge and teeth?
A：Use high-strength bolts, tighten diagonally with spring washers and retorque before each shift.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories