252110006 bucket for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Product Name: 2.7m³ Mining Rock Bucket Assembly
Part No.: 252110006
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Bucket Type: Heavy-duty mining rock bucket
Capacity: 2.7m³
Main Material: NM400 wear-resistant steel plate
Matching Parts: Sleeve teeth, tooth sleeves, pins, cotter pins, heavy edge protectors, bolt kits
Connection: Articulated connection with boom and tilt cylinder via pins
Working Condition: Quarrying, hard rock digging, crushed stone handling, crusher feeding
Inspection Items: Dimension inspection, ultrasonic weld test, lug hole concentricity test, surface defect inspection

Applicable Scenarios

It matches XCMG ZL50G and ZL50GL loaders, widely used in quarries and crusher feeding lines for limestone, granite and hard boulders. It delivers higher throughput than the 2.5m³ mining bucket while keeping payload within limit. It is not suitable for long-term light-material yard work due to high tare weight and poor fuel economy.

- OEM lug geometry fully compatible with ZL50G/ZL50GL, direct hoist replacement without machine modification
- Thick NM400 plate plus dense reinforcing ribs provide strong impact and tear resistance for large hard rock
- 2.7m³ capacity improves single-pass productivity within safe payload range, better than 2.5m³ mining bucket
- Replaceable sleeve tooth set and heavy protectors cut overhaul expense and downtime
- Stress-relieved welds resist cyclic impact fatigue and extend bucket service life
- Interchangeable with earth bucket, light-material bucket and 2.5m³ mining bucket for quick switching
- Weld inspection before delivery, reliable for high-intensity continuous quarry production

FAQ 

Q：What is the difference between this 2.7m³ mining bucket and the 2.5m³ mining bucket?
A：Larger capacity for higher throughput. It shares the same heavy-duty plate, tooth holder and protector specification, suitable for quarries with moderate-size boulders.

Q：Can mining bucket be used for earth and sand?
A：Short-term emergency use is possible but not recommended. High dead weight increases fuel consumption. Earth bucket is preferred for earthwork.

Q：How to deal with loose bucket teeth?
A：Check broken or missing cotter pins and worn pins. Replace pins and cotters. Inspect the tooth set every shift due to heavy rock impact.

Q：Can cracks at tooth holder root be welded?
A：Tooth roots are high-stress zones. NDT is required. Short cracks can be gouged and welded with tough wear-resistant rod. Long cracks usually require bucket replacement.

Q：What are the installation precautions for new mining bucket?
A：Hoist gently, avoid hitting lugs and tooth holders. Do not hammer pins violently. Install cotter pins and test empty cycles before rock loading.

Q：What to inspect on delivery?
A：Verify part number, check deformation and weld defects, measure lug dimensions, test-fit teeth, sleeves and protectors.