252110003 blade for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Product Name: Left Side Blade for Mining Bucket
Part No.: 252110003
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Matching Parts: Mining rock bucket
Material: Wear-resistant alloy steel (quenched)
Matching parts: High-strength bolts, flat washers, spring washers
Installation: Bolted on the left end of bucket side plate
Working Condition: Quarry, hard rock digging, crushed stone handling
Inspection Items: Dimension inspection, hardness sampling, surface crack inspection

Applicable Scenarios

It matches mining rock bucket for XCMG ZL50G and ZL50GL, widely used in quarry and crusher feeding. It provides side protection and cutting while loading limestone, granite and gravel mixture. Earth and light-material buckets normally do not equip this kind of side blade.

- OEM dimension and hole layout, perfect fit with mining bucket side
- Quenched alloy steel, good abrasion and impact resistance, protects bucket side plate
- Bolt-on structure for separate replacement, low maintenance cost and short downtime
- Left-specific profile matches bucket corner curve for smooth cutting
- Sacrificial wear part prevents expensive damage to original side plate
- Matched with our mining bucket spare parts system for simple stock management

FAQ 

Q：Can left blade be installed on right side?
A：No. Left and right blades have different curved profiles. Wrong installation causes poor fit and easy loosening.

Q：Can curled blade stay in service?
A：Minor curling is acceptable temporarily. Replace it immediately if heavily curled or cracked to protect bucket side plate.

Q：Why do bolts get loose easily?
A：Heavy vibration in quarry. Always use new spring washers and tighten diagonally. Check every shift.

Q：Can this blade be fitted on earth bucket or light bucket?
A：Not recommended. Earth and light-material buckets have different hole layout and do not need side blade.

Q：Can I hardface the blade for reuse?
A：Not recommended. Welding destroys quenched layer and reduces wear resistance.

Q：What to check when receiving goods?
A：Verify part number, check cracks and warping, measure hole spacing and test fit with bucket corner.

Q：Which wears faster: side blade, main edge or bucket teeth?
A：Bucket teeth usually wear fastest, then side blade, then main protector. Inspect all together.