252904837 bucket for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Product Name: Reinforced Earthmoving Bucket Assembly
Part No.: 252904837
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Bucket Type: Reinforced earth bucket
Capacity: 3.0m³
Main Material: Wear-resistant structural steel plate
Matching Parts: Replaceable cutting edge, bolts, flat washers, spring washers
Connection: Articulated connection with boom and tilt cylinder via pins
Working Condition: Muck, backfill, gravel mixture, site grading, light construction waste cleanup
Inspection Items: Dimension inspection, ultrasonic weld test, lug hole concentricity test, surface defect inspection

Applicable Scenarios

It matches XCMG ZL50G and ZL50GL loaders, widely used for foundation excavation, backfilling, site leveling, aggregate transport and light construction waste disposal. It is suitable for soil mixed with small gravel. It has better wear and impact resistance than standard earth bucket. Long-term operation for large hard rock is forbidden, which may cause bucket tearing and deformation.

- OEM lug geometry fully compatible with ZL50G/ZL50GL, direct hoist replacement without machine modification
- Thickened steel and multi-position ribs provide better impact and fatigue resistance than standard earth bucket, longer service life in gravel mixture
- Compatible with replaceable cutting edge, separate edge replacement cuts maintenance cost and downtime
- Optimized bucket profile for easy penetration and clean dumping, less soil and gravel sticking
- Reinforcement on high-stress areas, ideal for abrasive earthwork sites with abundant gravel
- Shared mounting interface with rock bucket, standard earth bucket and large-volume light buckets for fast switching
- Weld inspection before delivery, stable quality for long continuous earthwork shifts

FAQ 

Q：What is the difference between reinforced earth bucket and standard earth bucket?
A：It uses thicker steel and extra ribs at bucket root, lugs and cutting edge. It resists gravel impact better for abrasive earthwork, with higher price.

Q：Can reinforced earth bucket replace rock bucket for rock digging?
A：No. Its strength is still lower than rock bucket. It only tolerates minor gravel mixture. Continuous hard rock digging will cause weld cracking and side plate deformation.

Q：Must I use original cutting edge?
A：Original edge is preferred for perfect curve and hole matching. Non-standard edges lead to poor fit and uneven bolt load.

Q：How to handle small cracks on bucket plate?
A：Grind out the crack root completely before welding. Reduce payload after repair if cracks are near ribs or lugs.

Q：What are the installation precautions?
A：Hoist gently to avoid damage. Align lugs without hammering pins violently. Install cotter pins and test empty cycles before loading.

Q：What to inspect on delivery?
A：Verify part number, check deformation and weld defects, measure lug dimensions, test-fit matching cutting edge.