803604583 clip for XCMG ZL50G/ZL50GL Wheel Loader

803604583 clip for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 803604583 clip for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Pipe Clamp, Part No.803604583, fits XCMG ZL50G, ZL50GL wheel loader. It is a fastening part for pipeline fixing.

Product Detail

Product Tags

description

This 803604583 pipe clamp is matched for air and hydraulic pipelines of XCMG ZL50G and ZL50GL wheel loader. It is stamped from high-strength carbon steel with galvanized anti-corrosion coating, composed of clamp body, fastening bolt and damping rubber pad. It restrains the position of hoses and steel pipes and isolates continuous vibration during operation, reducing the risk of loose joints and leakage. The built-in rubber liner prevents scratch on hose surface and absorbs vibration. Clamping diameter and mounting hole spacing follow OEM drawings for direct replacement of old failed clamps, compatible with original pipes and bolts without layout modification. Every clamp passes dimension and tension test. It is corrosion-resistant and stable under heavy-load bumpy conditions, protecting brake and hydraulic pipelines from abrasion and leakage.

product parameters

Product Name: Pipe Clamp
Part No.: 803604583
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Function: Fixing brake air hose, hydraulic hose and steel pipe
Material: Carbon steel with galvanized coating, built-in rubber damping liner
Installation: Matches original bolts, spring washers, air pipes, hydraulic hoses and steel pipes
Working Condition: Quarry mining, aggregate yard, heavy earthwork and construction projects
Inspection Items: Dimension check, clamping tension test, anti-corrosion coating inspection, deformation verification

Applicable Scenarios

It is installed on chassis, brake bracket and valve group pipeline area of XCMG ZL50G and ZL50GL wheel loader, widely used in quarry, aggregate yard and earthwork construction sites.

advantage

▪ Thick steel clamp body with high tensile strength, resisting opening and cracking under vibration
▪ Built-in rubber liner provides soft clamping to avoid hose cut, absorb vibration and slow aging
▪ Galvanized surface resists mud and rust for easy disassembly after long service
▪ Balanced clamping force prevents pipe flattening or slipping displacement
▪ Compact profile fits narrow frame clearance without interfering with nearby brackets and valves
▪ Compatible with air pipes, brake cylinder, booster pump and fixed bracket for convenient stock management
▪ Factory tension test screens defective clamps for long-term reliable holding performance

FAQ 

Q：Can rusty pipe clamp keep in service?
A：Light surface rust without deformation is acceptable. Replace it if the steel is thinned or cracked.

Q：Why does hose still shake after tightening clamp?
A：Check whether clamp size matches hose outer diameter, rubber liner is missing or bolt thread slips.

Q：What fault will be caused without pipe clamp?
A：Unrestrained hose swings and rubs, leading to hose rupture, air or oil leakage and system failure.

Q：Can iron wire replace original pipe clamp?
A：It is not recommended. Wire cuts hose easily and loosens quickly under vibration.

Q：How to store spare pipe clamps?
A：Store in dry and ventilated area, avoid moisture and heavy compression to prevent deformation.

Q：How many clamps are required for one hose?
A：Follow OEM drawing position. Use multiple clamps on long hoses to reduce swing.

Q：How tight should the clamp be?
A：Tighten until no sliding. Do not over-tighten to squeeze and damage the hose.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories